Attributes

Length max [L max]	6000mm
Productgroup ID	2
Section load in accumulation operation	60kg
Workpiece pallet total weight [mG]	30kg
ESD	yes
Length min [L min]	240mm
Pneumatic straight connection [Ø]	6mm
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar
Weight	0kg
Scope of delivery	1x lift transverse unit HQ 2/O,1x belt section BS 2/TE,1x connection kit,1x housing elements SK 2/B,Pneumatic equipment for two or three positions,Assembly kit for electrical position inquiry
Delivery information	Lift transverse unit HQ 2/O, assembled,Belt section BS 2/TE, assembled,Protective housing, not assembled,Protective housing, not assembled
Recommended accessories	Damper DA 2/60 for the outfeeding of workpiece pallets WT 2, WT 2/F, WT 2/H or WT 2/F-H at v<sub>N</sub> > 9 m/min,Rocker WI 2/…, WI/M and dampers DA 2/60, DA 2/100-C for BG 2 for the infeeding of workpiece pallets
Required accessories	1x M12x1 sensor with rated sensing range S for each (top/bottom) position inquiry<sub>N</sub> = 4 mm
Preferred values	160,240,320,400,480,640,800

• Pre-assembled module for branching off into a transverse section in which the second end does not lead to a further transverse section (dead end)
• Size 2 from ≥ 480 x 480 mm onwards with two lifting cylinders per lift transverse unit
• Conveyor medium: Toothed belt (suitable for use in an EPA)
• Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions
• Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
• n.a.
• Reversible operation possible
• Accumulation operation not permitted on the lift transverse units
• - n.a.

Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions, Conveyor medium: Toothed belt (suitable for use in an EPA), Reversible operation possible, Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST

• Data Sheet