Attributes

Productgroup ID	2
Repetition accuracy	±0,05
Permissible vertical process force	400N
Workpiece pallet total weight [mG]	40kg
Lift arrangement [HA]	0; 1
ESD	yes
Pneumatic straight connection [Ø]	8mm
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar
Weight	0kg
Notice	Repetition accuracy applies only to lifts of up to 204 mm,Permissible vertical process forces incl. WT 2,HA = 1 only for b = 240 mm
Scope of delivery	Incl. fastening material,Incl. throttle non-return valve
Delivery information	Fully assembled
Required accessories	Position inquiry set for SA lifting cylinder,Position inquiry set with turret stop RA,HP 2/L Housing Element
Length in direction of transport [lT]	160,240,320
Preferred values	160,240,320

• n.a.
• Positioning with exchangeable positioning pins in the HP 2/L and positioning bushings in the WT 2 workpiece pallet
• Lifting cylinder of Ø 40 mm with damping for the lower and upper end positions
• Exchange of lifting cylinder possible without disassembling the lift plate
• 5 stroke ranges h₀ of 0 ... 240 mm are infinitely adjustable within the lift range
• Optional lifting cylinder for b = 240 mm, centrally (HA = 0) or offset (HA = 1). Space-saving configuration made possible by inner WT stop
• Adjustment time where H = 50 mm without load in each case: Upward stroke = 0.5 s, downward stroke = 0.5 s (= lift range from 0 to 28 mm)
• - n.a.
• 5 stroke ranges h0 of 0 ... 240 mm are infinitely adjustable within the lift range - 5 stroke ranges h₀ of 0 ... 240 mm are infinitely adjustable within the lift range

HP 2/L Lift Positioning Unit
, , Positioning with exchangeable positioning pins in the HP 2/L and positioning bushings in the WT 2 workpiece pallet, Lifting cylinder of Ø 40 mm with damping for the lower and upper end positions, Exchange of lifting cylinder possible without disassemb

• 3D CAD
• Data Sheet

HP 2/L Lift Positioning Unit

1)	Not included in the scope of delivery

No.			3842998952
Max. total weight of workpiece pallet	mG	kg	40
ESD			yes
Required compressed air connection	p	bar	4 ... 6 bar
Pneumatic push-in fitting	Ø	mm	8

Lift range

Nominal stroke	WT lift above conveying level
hN	h0
(mm)	(mm)
50	0 ... 28
100	35 ... 78
160	95 ... 138
200	135 ... 178
250	185 ... 228