LIFT TRANSFER UNIT HQ 5/XH
| Productgroup ID | 2 |
| Weight | 0kg |
| Scope of delivery | Incl. ST 5/XH or ST 5/H conveyor unit |
| Delivery information | Fully assembled |
| Recommended accessories | protective covers,For position inquiry workpiece pallet sensor |
| Required accessories | VE 5/D-1000 stop gate, VE 5/D-300 stop gate, VE 5/D-301 stop gate or VE 5/200 stop gate,SH 2/U-H switch bracket,Clamping holder for sensors |
| Preferred values | 455,650,845,1040 |
| King shaft installation on main section [DSM] | 1; 2 |
- The HQ 5 lift transverse unit is a ready-for-operation module for branching transport. It lifts the workpiece pallet from the rollers and moves it transversely to the original conveyor direction via a driven roller section
- Note: Note the orientation of the workpiece pallet after branching
- Can be used with all WT 5 workpiece pallets
- The transverse transport level is 4.5 mm above the transport level of the longitudinal section
- Protective casing can also be removed in the case of low conveyor heights
- Compressed air connection: 5 ... 6 bar
- Pneumatic push-in fitting: 6 mm
- Note: Note the orientation of the workpiece pallet after branching - Note: Note the orientation of the workpiece pallet after branching
Pneumatic push in fitting: 6 mm, Can be used with all WT 5 workpiece pallets, The transverse transport level is 4.5 mm above the transport level of the longitudinal section, Protective casing can also be removed in the case of low conveyor heights, Compre
VE 5/200, VE 5/D‑300, VE 5/D‑301 or VE 5/D‑1000 stop gate
VE 5/200, VE 5/D‑300, VE 5/D‑301 or VE 5/D‑1000 stop gate
For non-damped (VE 5/200) or damped (VE 5/D-300 and VE 5/D‑1000) stopping of accumulating workpiece pallets for outfeedingCAD data
Clamping holder for sensors
Clamping holder for sensors
Clamping holder for sensor Ø 12 mm, for screwing onto the stop gateSwitch Bracket
Switch Bracket
SH 2/U-H switch bracket Assembly kit for SH 2/U-H switch bracket Accessories, sensor in Open Center assembly kit for SH 2/U-H switch bracketCAD data
Condition of Delivery
| HQ 5/H lift transverse unit | Fully assembled |
| HQ 5/XH lift transverse unit |
Scope of delivery
| HQ 5/H lift transverse unit | Incl. ST 5/XH or ST 5/H conveyor unit |
| HQ 5/XH lift transverse unit |
HQ 5 lift transverse unit
|
b (mm) |
lWT (mm) |
p (mm) |
L (mm) |
L1 (mm) |
L2 (mm) |
L3 (mm) |
L4 (mm) |
L5 (mm) |
|
455 |
455 |
130 |
1300 |
400,0 |
400,0 |
493,8 |
686,3 |
650,0 |
|
455 |
650 |
130 |
1430 |
367,5 |
367,5 |
493,8 |
816,3 |
715,0 |
|
455 |
650 |
195 |
1560 |
432,5 |
432,5 |
558,8 |
881,3 |
780,0 |
|
650 |
650 |
130 |
1430 |
367,5 |
367,5 |
493,8 |
816,3 |
715,0 |
|
650 |
650 |
195 |
1560 |
432,5 |
432,5 |
558,8 |
881,3 |
780,0 |
|
650 |
845 |
130 |
1690 |
400,0 |
400,0 |
493,8 |
1076,3 |
845,0 |
|
650 |
845 |
195 |
1755 |
432,5 |
432,5 |
526,3 |
1108,8 |
910,0 |
|
650 |
845 |
260 |
1820 |
595,0 |
335,0 |
688,8 |
1271,3 |
650,0 |
|
845 |
845 |
130 |
1690 |
400,0 |
400,0 |
493,8 |
1076,3 |
845,0 |
|
845 |
845 |
195 |
1755 |
432,5 |
432,5 |
526,3 |
1108,8 |
877,5 |
|
845 |
845 |
260 |
1820 |
595,0 |
335,0 |
688,8 |
1271,3 |
650,0 |
|
845 |
1040 |
130 |
1820 |
367,5 |
367,5 |
493,8 |
1206,3 |
910,0 |
|
845 |
1040 |
195 |
1950 |
432,5 |
432,5 |
558,8 |
1271,3 |
975,0 |
|
845 |
1040 |
260 |
2080 |
432,5 |
562,5 |
558,8 |
1271,3 |
910,0 |
|
845 |
1040 |
325 |
1950 |
432,5 |
432,5 |
558,8 |
1271,3 |
975,0 |
HQ lift transverse unit (stop gate, infeeding)
|
T8 |
= |
Delay 100 ... 200 ms |
|
S3 |
= |
Lift end position at bottom |
|
S4 |
= |
Lift end position at top |
|
S6 |
= |
WT before VE (Z4) |
|
S8 |
= |
WT on HQ |
|
S9 |
= |
Enable main section 2 |
|
S10 |
= |
WT before VE (Z5) |
|
Y3 |
= |
Lifting cylinder HQ (Z3) |
|
Y4 |
= |
Secondary section VE (Z4) + main section DA (Z6) |
|
Y5 |
= |
Main section VE (Z5) |
|
M1 |
= |
HQ motor |
|
P10 |
= |
Main section priority |
HQ lift transverse unit (separating, outfeeding)
|
T8 |
= |
Delay 100 ... 200 ms |
|
S4 |
= |
Lift end position at bottom |
|
S7 |
= |
Lift end position at top |
|
S1 |
= |
WT before VE (Z1) |
|
S3 |
= |
WT on HQ |
|
S5 |
= |
Enable main section |
|
S6 |
= |
WT after VE (Z3) |
|
Y2 |
= |
Lifting cylinder HQ (Z2) |
|
Y1 |
= |
Main section VE (Z1) |
|
Y3 |
= |
Main section VE (Z3) |
|
M1 |
= |
HQ motor |
|
A1 |
= |
Identification system with straight-ahead signal |
|
No. |
| 3842998854 |
| 3842998855 |
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.