Attributes

Productgroup ID	2
Number of rollers [N]	3; ... 12; 16; 21; 32
Length min [L min]	4160mm
Length max [l max]	390mm
Weight	0kg
Delivery information	Ready-to-install, gear motor enclosed separately,Mounting option for the gear motor on the right/left possible
Material information	Shaft: Brass
Preferred values	455,650,845,1040
Workpiece pallet length [lWT]	455,650,845,1040

• For driving ST 5/…-FR conveyor units, CU 5/…-FR curves, DI 5/…-FR diverters, JU 5/…-FR junctions and an HQ 5/… lift transverse unit
• Reversible operation possible
• Accumulation operation possible
• Motor connection with plug (AT = S) or terminal box (AT = K)
• Freely selectable motor position and length
• Gear motor can be mounted on both sides on the transmission drive (MA = R and MA = L)
• Viewing window for checking the toothed belt
• Due to the simple and space-saving disassembly of the cover, adjacent components/machines can be positioned at a distance of 20 mm from the AS 5
• Optional frequency converter
• Suitable for clean room of ISO class 7
• Suitable for dry room <1% RH
• Notice: To transport workpieces without workpiece pallets. Use plastic lateral guides to ensure the workpiece is not damaged!
• Notice: To transport workpieces without workpiece pallets. Use plastic lateral guides to ensure the workpiece is not damaged! - Notice: To transport workpieces without workpiece pallets. Use plastic lateral guides to ensure the workpiece is not damaged!

AS 5/H-FR drive unit
Accumulation operation possible, Reversible operation possible, Motor connection with plug (AT = S) or terminal box (AT = K), Freely selectable motor position and length, Gear motor can be mounted on both sides on the transmission drive (MA = R and MA = L

• 3D CAD
• Data Sheet

Connection Kits

Connection Kits

Profile connector Intermediate plate Coupling

CAD data

SZ 5 Leg Set

SZ 5 Leg Set

Leg set for general applications

CAD data

SZ 5/U Leg Set

SZ 5/U Leg Set

Leg set for multi-level sections

CAD data

Condition of Delivery

Ready-to-install, gear motor enclosed separately

Mounting option for the gear motor on the right/left possible

AS 5/H-FR, AS 5/XH-FR drive module, division p = 130 mm

1)	Note: In this depiction, the terminal box can collide with the leg sets. It protrudes into the section.

AS 5/H-FR, AS 5/XH-FR drive module, division p = 195 mm; p = 260 mm; p = 325 mm

Division p and drive position DP

p = 130 mm

DP is the roller to which the transmission drive is fitted. This roller is not driven.

Example: DP = 2

Possible drive positions DP with division p

p (mm)	MA	DP
130	R; L	1 ... 31

Note:

Only if p = 130 mm: Roller corresponding to DP is not driven.

Gear motor can be mounted on both sides.

 

Permissible position lDP (mm) from start of section: lDP = DP x p - p/2

 

Example of p = 130 mm and DP = 10: lDP = 10 x 130 mm - 65 mm = 1235 mm

 

Division p and drive position DP

p = 195 mm; p = 260 mm; p = 325 mm

DP is the space between two rollers in which the transmission drive is fitted.

Example: DP = 1

Division p and drive position DP

p (mm)	MA	DP
195	R; L	1 ... 20
260	R; L	1 ... 15
325	R; L	1 ... 11

Permissible position lDP (mm) from start of section: lDP = DP x p

 

Example of p = 260 mm and DP = 5: lDP = 5 x 260 mm = 1300 mm

Note:

To transport workpieces without workpiece pallets. Use plastic lateral guides to ensure the workpiece is not damaged!

Attachment options for the gear motor

Customer-specific motor

Attachment options for the gear motor

Standard

Drive layout