Attributes

Track width in direction of transport [b max]	1200mm
Track width in direction of transport [b min]	400mm
Productgroup ID	2
Min. workpiece pallet weight	5kg
Workpiece pallet total weight [mG]	100kg
Operating temperature [T] max	0 ... +60 °C
Weight	0kg
Notice	High-temperature stop gate on request,Individual width variants possible
Scope of delivery	Incl. all fastening material to mount on ST 2/... conveyor section
Delivery information	Not assembled
Recommended accessories	VE 2/RS-H Return Stop
Material information	Housing: Steel,Stop cam: Steel,Cross strut: Aluminum
Preferred values	400,480,640,800,1040,1200

• Pneumatic stop gate
• For central separation of WT 2/H and WT 2/F-H workpiece pallets
• Suitable for accumulation loads up to 1000 kg
• Infinitely adjustable damping
• Optimal damping for total weights up to 100 kg
• Can be combined with WT 22/H and WT 2/F-H

VE 2/D100-H Stop Gate
Pneumatic stop gate, Infinitely adjustable damping, For central separation of WT 2/H and WT 2/F H workpiece pallets, Suitable for accumulation loads up to 1000 kg, Optimal damping for total weights up to 100 kg, Can be combined with WT 22/H and WT 2/F H

• 3D CAD
• Data Sheet

VE 2/RS-H Return Stop

VE 2/RS-H Return Stop

Spring-loaded safety catch Can be used on the left or right

CAD data

Condition of Delivery

Not assembled

Scope of delivery

Incl. all fastening material to mount on ST 2/... conveyor section

Characteristic curve diagram
damping setting of accumulation roller chain μ=0.02

Dmax/min damping setting

1)	Damping effect limited, use of a VE 2/RS-H return stop recommended
2)	Recommended range
3)	not possible

Characteristic curve diagram
damping setting of flat top chain μ=0.2

Dmax/min damping setting

1)	Damping effect limited, use of a VE 2/RS-H return stop recommended
2)	Recommended range
3)	not possible

Max. permitted section load

VE 2/D100-H Stop Gate

0 = transport level

Dampened stopping of the first accumulating workpiece pallet. The stop gate stops one or more accumulating workpiece pallets at the defined stop surface of the workpiece pallet. For central separation, the stop gate is mounted inside the tracks on the conveyor section using the supplied cross connectors. When the pressure is released, the stop gate is closed by a spring and the workpiece pallet is stopped.

Circuit diagram

1)	Not included in the scope of delivery

No.			3842998747
Max. total weight of workpiece pallet	mG	kg	100 kg
Workpiece pallet minimum weight	m	kg	5 kg
Operating temperature 1)	T	°C	0 ... +60
Material specification			Housing: Steel Lug cam: Steel Cross strut: Aluminum

1)	High-temperature stop gate on request

Compressed air consumption of TS 2plus units