DAMPER DA 2/250-H

Pneumatic damper, Can be combined with WT 22/H and WT 2/F-H, Infinitely adjustable, Installation location: HQ 2/C-H lift transverse unit, For permitted total weight of workpiece pallets up to 250 kg / Material Number:3842998746

DAMPER DA 2/250-H

Material #3842998746

Request Quote

Attributes

Productgroup ID 2
Workpiece pallet total weight [mG] 250kg
Mass [m] 5kg
Operating temperature [T] max 0 ... +60 °C
Pneumatic straight connection [Ø] 6mm
Track width in the longitudinal conveyor [bL max] 1200mm
Track width in the longitudinal conveyor min [bL min] 480mm
Weight 0kg
Notice High-temperature damper on request
Scope of delivery Incl. fastening material,DA 2/100-H damper for infeeding or outfeeding the WT 2/H or WT 2/F-H workpiece pallets via an HQ 2/C-H
Delivery information Not assembled
Material information Housing: Aluminum, hard anodized,Stop: Steel, hardened,Section profile: Aluminum, natural; anodized
Preferred values 480,640,800,1040,1200
  • For permitted total weight of workpiece pallets up to 250 kg
  • Pneumatic damper
  • Infinitely adjustable
  • Installation location: HQ 2/C-H lift transverse unit
  • Can be combined with WT 22/H and WT 2/F-H
DA 2/250-H Damper
Pneumatic damper, Can be combined with WT 22/H and WT 2/F H, Infinitely adjustable, Installation location: HQ 2/C H lift transverse unit, For permitted total weight of workpiece pallets up to 250 kg

Characteristic curve diagram
damping setting of accumulation roller chain μ=0.02

Dmax/min damping setting

1) Damping effect limited, use of a VE 2/RS-H return stop recommended
2) Recommended range
3) not possible

Characteristic curve diagram
damping setting of flat top chain μ=0.2

Dmax/min damping setting

1) Damping effect limited, use of a VE 2/RS-H return stop recommended
2) Recommended range
3) not possible

DA 2/250-H Damper

DA 2/… dampers are used to cushion the impact of workpiece pallets when they are moved from a transverse section into a longitudinal section or vice versa.

The damper cushions the impact of workpiece pallets when they are moved from a transverse section into a longitudinal section and vice versa. The pneumatic return occurs in parallel to the opening of the stop gate, which permits the workpiece pallet to move toward the damper. For installation in an HQ 2/C-H lift transverse unit. The damper is traversable.

No.

3842998746

Max. total weight of workpiece pallet

mG

kg

250

Max. operating temperature 1)

T

°C

0 ... +60

Material entry

Housing: Aluminum, hard anodized
Stop: Steel, hardened
Section profile: Aluminum, natural; anodized

Mass

m

kg

5

Pneumatic push-in fitting

Ø

mm

6
1) High-temperature damper on request

Compressed air consumption of TS 2plus units

Request Quote

How to Find Us

If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.

Headquarters

1505 W. Hamlin Road
Rochester Hills, MI 48309

Phone
248-584-5600
Fax
248-584-1117

West Michigan Office

Phone
269-381-1285
Fax
269-381-1379

Have questions?