Attributes

Productgroup ID	2
Workpiece pallet total weight [mG]	100kg
Mass [m]	5kg
Operating temperature [T] max	0 … +60 °C
Pneumatic straight connection [Ø]	6mm
Track width in the longitudinal conveyor [bL max]	1200mm
Track width in the longitudinal conveyor min [bL min]	480mm
Weight	0kg
Notice	High-temperature damper on request
Scope of delivery	Incl. fastening material,DA 2/100-H damper for infeeding or outfeeding the WT 2/H or WT 2/F-H workpiece pallets via an HQ 2/C-H
Delivery information	Not assembled
Material information	Housing: Aluminum, hard anodized,Stop: Steel, hardened,Section profile: Aluminum, natural; anodized
Preferred values	480,640,800,1040,1200

• For permitted total weight of workpiece pallets up to 100 kg
• Pneumatic damper
• Infinitely adjustable
• Installation location: HQ 2/C-H lift transverse unit
• Can be combined with WT 22/H and WT 2/F-H

DA 2/100-H Damper
Pneumatic damper, Can be combined with WT 22/H and WT 2/F H, Infinitely adjustable, For permitted total weight of workpiece pallets up to 100 kg, Installation location: HQ 2/C H lift transverse unit

• 3D CAD
• Data Sheet

Characteristic curve diagram
damping setting of accumulation roller chain μ=0.02

Dmax/min damping setting

1)	Damping effect limited, use of a VE 2/RS-H return stop recommended
2)	Recommended range
3)	not possible

Characteristic curve diagram
damping setting of flat top chain μ=0.2

Dmax/min damping setting

1)	Damping effect limited, use of a VE 2/RS-H return stop recommended
2)	Recommended range
3)	not possible

DA 2/100-H Damper

DA 2/… dampers are used to cushion the impact of workpiece pallets when they are moved from a transverse section into a longitudinal section or vice versa.

The damper cushions the impact of workpiece pallets when they are moved from a transverse section into a longitudinal section and vice versa. The pneumatic return occurs in parallel to the opening of the stop gate, which permits the workpiece pallet to move toward the damper. For installation in an HQ 2/C-H lift transverse unit. The damper is traversable.

No.			3842998745
Max. total weight of workpiece pallet	mG	kg	100
Max. operating temperature 1)	T	°C	0 … +60
Material entry			Housing: Aluminum, hard anodized Stop: Steel, hardened Section profile: Aluminum, natural; anodized
Mass	m	kg	5
Pneumatic push-in fitting	Ø	mm	6

1)	High-temperature damper on request

Compressed air consumption of TS 2plus units