Attributes

Track width [b1 max]	600mm
Track width in direction of transport [b max]	1320mm
Track width [b2 min]	216mm
Track width in direction of transport [b min]	576mm
Track width [b2 max]	600mm
Productgroup ID	2
Track width [b1 min]	240mm
Tracks	3
Weight	0kg
Delivery information	Fully assembled,Motors included separately
Length [l]	1264 ... 6000 mm if BG = 1,1564 ... 6000 mm if BG = 2,1864 ... 6000 mm if BG = 3,2230 ... 6000 mm if BG = 4,2530 ... 6000 mm if BG = 5
Required accessories	Leg set SZS/B

• Lift transverse unit LTS/…, consisting of a belt section CSS/… and a lift unit for setting up right-angled section branches
• Version with two to four tracks. Distance between the tracks can be determined individually (b1 to b3). Comply with minimum dimensions
• Permissible load:
  ‒ Per track: max. 0.15 kg/cm support surface length and
  max. 40 kg for LTS/F,
  max. 60 kg for LTS/B
  ‒ Per belt section: max. 120 kg
• O-rings for high friction coefficients and improved static friction for transverse conveyor
• Tracks without lateral guide
• Reversible across the entire value range
• Simple exchange of the toothed belts
• Gear motors are suitable for operation with frequency converter
• Motor mounting on right (MA = R) or left (MA = L) possible on each track of the belt section (MS = 1 ... 4; MS = 1 denotes the left track in the direction of transport)
• Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K)
• Two lift positions
• Permissible load:
  ‒ Per track: max. 0.15 kg/cm support surface length and
  max. 40 kg for LTS/F,
  max. 60 kg for LTS/B
  ‒ Per belt section: max. 120 kg - Permissible load:
  ‒ Per track: max. 0.15 kg/cm support surface length and
  max. 40 kg for LTS/F,
  max. 60 kg for LTS/B
  ‒ Per belt section: max. 120 kg

Lift transverse unit LTS/B-3
Motor connection optionally with cable/plug (AT = S) or terminal box (AT = K), Gear motors are suitable for operation with frequency converter, Lift transverse unit LTS/…, consisting of a belt section CSS/… and a lift unit for setting up right angled sect

• 3D CAD
• Data Sheet