Attributes

Productgroup ID	2
Weight	0kg
Delivery information	Ready-to-install
Required accessories	Connection kit for connecting the transverse section
Material information	Roller: Steel, galvanized
Preferred values	455,650,845,1040

• The connection bridge is used for length adjustment when parallel transverse sections are used with lift transverse units and curves/diverters/junctions
• Support profile made of anodized aluminum
• Permissible section load for ST 5/XH: 380 kg/m
  ST 5/H: 200 kg/m
• Lateral guide profile made of steel, polymer, or aluminum in an anodized aluminum support
• Driven via king shaft with bevel wheels made of polymer or sintered metal
• Notice: In contrast to a conveyor unit or a drive module, curves, diverters and junctions have a different roller distance. The connection bridge is not a conveyor unit with a standard roller distance.
• Permissible section load for ST 5/XH: 380 kg/m
  ST 5/H: 200 kg/m - Permissible section load for ST 5/XH: 380 kg/m
  ST 5/H: 200 kg/m
• Notice: In contrast to a conveyor unit or a drive module, curves, diverters and junctions have a different roller distance. The connection bridge is not a conveyor unit with a standard roller distance. - Notice: In contrast to a conveyor unit or a drive module, curves, diverters and junctions have a different roller distance. The connection bridge is not a conveyor unit with a standard roller distance.

ST 5/H connection bridge
Support profile made of anodized aluminum, Permissible section load for ST 5/XH: 380 kg/m
ST 5/H: 200 kg/m, Lateral guide profile made of steel, polymer, or aluminum in an anodized aluminum support, Driven via king shaft with bevel wheels made of polymer

• 3D CAD
• Data Sheet

Connection kit for connecting the transverse section

Connection kit for connecting the transverse section

For connecting the transverse section, independent of the drive side of the main section. If a circuit only consists of lift transverse units, the transverse sections are connected directly to the longitudinal section The guide kit is part of the connection bridge. To connect a standard section, the guide kit must be ordered separately.

CAD data

Condition of Delivery

ST 5/XH connection bridge	Ready-to-install
ST 5/H connection bridge

Set up of transverse conveyor

No.	Material
3842998605	Lateral guide: Steel, plastic or aluminum Bevel wheel: Plastic or sintered metal
3842998604