Attributes

Productgroup ID	2
Number of rollers [N]	10; 11; 13
Weight	0kg
Notice	l<sub>1</sub> = length of main section,l<sub>2</sub> = length of secondary section,l<sub>3</sub> = length of secondary section up to center of main section,l<sub>4</sub> = length of secondary section and width of main section
Delivery information	Ready-to-install,Optional: Protective covers mounted (protective covers cannot be ordered separately)
Length of secondary section up to center of main section [l3]	650,780,910
Length of secondary section [l2]	382.5,415,447
Track width [b]	455,650,845
Track width in direction of transport [b]	455,650,845
Length of secondary section and width of main section [l4]	917.5,1145,1372.5
Length of main section [l1]	921.5,1149,1376.5
Number of rollers [N]	10,11,13
King shaft installation on main section [DSM]	1; 2

• The curve is a ready-for-operation module for branching transport of workpiece pallets. Curves can be driven either on the inside or on the outside.
• Note: The curve is not suitable for accumulation operation. For permissible loads, see table (under order details).
• Reversible operation possible
• Accumulation operation not permitted
• Support profile made of anodized aluminum
• Lateral guide profile made of steel, polymer, or aluminum in an anodized aluminum support
• Driven via king shaft with bevel gears made of sintered metal
• Drive possible with AB 5
• Roller spacing p = 130
• Full rollers
• m_G Up to 300 kg (at v = 9 m/min)
• Note: The curve is not suitable for accumulation operation. For permissible loads, see table (under order details). - Note: The curve is not suitable for accumulation operation. For permissible loads, see table (under order details).
• mG Up to 300 kg (at v = 9 m/min) - m_G Up to 300 kg (at v = 9 m/min)

CU 5/XH curve
Accumulation operation not permitted, Reversible operation possible, Support profile made of anodized aluminum, Lateral guide profile made of steel, polymer, or aluminum in an anodized aluminum support, The curve is a ready for operation module for branch

• 3D CAD
• Data Sheet

Condition of Delivery

CU 5/XH curve	Ready-to-install	Optional: Protective covers mounted (protective covers cannot be ordered separately)
CU 5/H curve

CU 5/H, CU 5/XH curves

b1) (mm)	lWT2) (mm)	N	l13) (mm)	l24) (mm)	l35) (mm)	l4 (mm)
455	455; 650	10	921,5	382,5	650	917,5
650	650; 845	11	1149	415	780	1145
845	845; 1040	13	1376,5	447	910	1372,5

1)	b = track width in direction of transport
2)	lWT = workpiece pallet length (in direction of transport)
3)	l1 = length of the main section
4)	l2 = length of the secondary section
5)	l3 = length of secondary section up to center of main section

Set up of curves, diverters, junctions

S1	=	WT after VE
S3	=	WT after CU
Y1	=	Open VE (Z1)

1)	Outlet
2)	Inlet
3)	Transport height difference between main and secondary section