Attributes

Productgroup ID	2
Number of rollers [N]	3; 4; 5 ... 32
Length min [L min]	4160mm
Length max [l max]	390mm
Weight	0kg
Delivery information	Ready-to-install
Required accessories	AS 5/... drive unit,SZ 5/... leg set,Connection Kits
Material information	Lateral guide: Steel, plastic or aluminum,Bevel wheel: Plastic or sintered metal,Roller: Steel, galvanized or steel, nitrocarburized
Preferred values	455,650,845,1040
Workpiece pallet length [lWT]	455,650,845,1040

• The conveyor unit is a ready-for-operation module, which is particularly suitable for transporting workpieces without workpiece pallets
• Note: Depending on the roller spacing, the use of ST 5/...-FR conveyor units with workpiece pallets is limited. Other roller spacings available on request
• Reversible operation possible
• Accumulation operation possible
• Support profile made of anodized aluminum
• Permissible section load: ST 5/XH-FR: 380 kg/m and ST 5/H-FR: 200 kg/m
• Lateral guide profile made of steel, polymer, or aluminum in an anodized aluminum support
• Driven via king shaft with bevel wheels made of polymer or sintered metal
• Suitable for clean room of ISO class 7
• Suitable for dry room <1% RH
• Note: Depending on the roller spacing, the use of ST 5/...-FR conveyor units with workpiece pallets is limited. Other roller spacings available on request - Note: Depending on the roller spacing, the use of ST 5/...-FR conveyor units with workpiece pallets is limited. Other roller spacings available on request

ST 5/H-FR conveyor unit
Accumulation operation possible, Reversible operation possible, Suitable for clean room of ISO class 7, Suitable for dry room <1% RH, Support profile made of anodized aluminum, Lateral guide profile made of steel, polymer, or aluminum in an anodized a

• 3D CAD
• Data Sheet

AS 5/XH, AS 5/H-FR Drive Units (with full rollers)

AS 5/XH, AS 5/H-FR Drive Units (with full rollers)

For driving ST 5/…-FR conveyor units, CU 5/…-FR curves, DI 5/…-FR diverters, JU 5/…-FR junctions and an HQ 5/… lift transverse unit

Connection Kits

Connection Kits

Profile connector Intermediate plate Coupling

CAD data

SZ 5 Leg Set

SZ 5 Leg Set

Leg set for general applications

CAD data

SZ 5/U Leg Set

SZ 5/U Leg Set

Leg set for multi-level sections

CAD data

Condition of Delivery

ST 5/XH-FR conveyor unit	Ready-to-install
ST 5/H-FR conveyor unit

ST 5/XH-FR, ST 5/H-FR conveyor unit

Conveyor unit selection

No.	Material
3842998523	Lateral guide: Steel, plastic or aluminum Bevel wheel: Plastic or sintered metal Roller: Steel; galvanized or steel; nitrocarburized
3842998522