Attributes

Productgroup ID	2
Repetition accuracy	±0,025
Permissible vertical process force	400N
Lift of WT over conveyor medium [h0]	0 ... 50
Dry room	<1
ESD	yes
Pneumatic straight connection [Ø]	6mm
Maximum load version [Fmax]	1600N
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar
Weight	0kg
Scope of delivery	Including all fastening elements,Protective housing,Switch bracket SH 1/S for querying the workpiece pallet position in the HP 1/P,Switch bracket SH 1/M-A for querying the position of the HP 1/P,Pneumatic screw fitting
Delivery information	Fully assembled
Recommended accessories	VE 1 stop gate for pre-separation,Damper DA 1/B,Sensor (Ø 6.5 mm; S<sub>N </sub>= 4 mm) for querying the workpiece pallet position in the HP 1/P and for querying the upper position of the HP 1/P
Preferred values	80,120,160

• Can be used with workpiece pallets WT 1/P
• Positioning via the HP 1/P positioning pins and the positioning bushings on the WT 1/P workpiece pallet
• Permissible vertical process force up to 400 N incl. WT 1/P. The positioning plate of the HP 1/P supports the WT 1/P on its carrying plate during this process.
• Repeat accuracy in X- and Y-direction: ± 0.025 mm
• Fixed stop for pre-positioning the arriving workpiece pallet. Can be replaced with a damper DA 1/B if necessary.
• With the HP 1/P in the version with variable lift, the lifting height above conveying level is max. 50 mm. The lifting height is infinitely variable.
• The version with a fixed lifting height 15 mm above the conveying level has an extremely low installation height. It is therefore particularly suited for use on manual workstations without restricting the legroom.
• The HP 1/P has three positions:- Bottom position: WT on the section are let through.- Center position: WT are stopped on the section (by integrated fixed stop or optional damper DA 1/B). The center position can be approached from the bottom and the top position.

Lift positioning unit HP 1/P h=0-50mm
Can be used with workpiece pallets WT 1/P, Positioning via the HP 1/P positioning pins and the positioning bushings on the WT 1/P workpiece pallet, Permissible vertical process force up to 400 N incl. WT 1/P. The positioning plate of the HP 1/P supports t

• 3D CAD
• Data Sheet

Recommended accessories

VE 1 stop gate for pre-separation
Damper DA 1	Damper DA 1/B
Sensor (Ø 6.5 mm; SN = 4 mm) for querying the workpiece pallet position in the HP 1/P and for querying the upper position of the HP 1/P

Stop Gate VE 1

Stop Gate VE 1

Pneumatic stop gate. When the pressure is released the stop gate is closed by a spring and the workpiece pallet is stopped. Tilting stop gate; can be opened without causing abrasion on the workpiece pallet stop surface. Permissible total load of all workpiece pallets in the accumulation: 80 kg (with conveying speed 9 m/min)

Assembly instructions

CAD data

Damper DA 1/B

Damper DA 1/B

Pneumatic damper Degree of damping adjustable Workpiece pallet load 0.5 kg to 6 kg permissible (with conveying speed 9 m/min)

Assembly instructions

CAD data

Scope of delivery

Lift positioning unit HP 1/P h=15mm	Including all fastening elements	Switch bracket SH 1/S for querying the workpiece pallet position in the HP 1/P	Switch bracket SH 1/M-A for querying the position of the HP 1/P	Pneumatic screw fitting
Lift positioning unit HP 1/P h=0-50mm		Protective housing	Switch bracket SH 1/S for querying the workpiece pallet position in the HP 1/P	Switch bracket SH 1/M-A for querying the position of the HP 1/P	Pneumatic screw fitting

Lift Positioning Unit HP 1/P

The workpiece must be fixed for processing in the processing station. The precision positioning units of the TS 1 make it possible to position the workpiece fastened on the workpiece pallet in a highly precise way in the processing station.

 

Positioning a workpiece pallet in a processing station where the workpiece pallet has to be raised above the conveying level.

1)	Not included in the scope of delivery

No.			3842998494	3842998493
ESD			yes	yes
Cleanroom class			ISO class 7	ISO class 7
Dry room	r.F.	%	<1	<1
Required compressed air connection	p	bar	4 ... 6 bar	4 ... 6 bar
Pneumatic push-in fitting	Ø	mm	6	6
Height to conveying level	h	mm	15	0 ... 50

		Lift positioning unit HP 1/P h=15mm	Lift positioning unit HP 1/P h=0-50mm
	(mm)	±0,025	±0,025
F	(N)	400 N	400 N
p	(bar)	4 ... 6 bar	4 ... 6 bar
Ø	(mm)	6 mm	6 mm

Minimum WT changing times t

bWT (mm)	v (m/min)	H (mm)	t (s)
80	12	15	1,88
80	12	50	2,75
120	12	15	1,52
120	12	50	2,20
160	12	15	2,23
160	12	50	2,34