Attributes

Productgroup ID	2
Workpiece pallet total weight [mG]	30kg
Track width in the longitudinal conveyor [bL]	160mm
ESD	yes
Pneumatic straight connection [Ø]	6mm
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	4bar
Weight	0kg
Scope of delivery	Incl. fastening material,Pneumatic equipment for two or three positions,Kit for electrical position inquiry (2x sensors),Connection kit,Protective housing
Delivery information	HQ 2/O and HQ 2/T lift transverse unit assembled,Drive kit, assembled,Motor attachment kit, drive motor enclosed,Protective housing, not assembled,Protective housing, not assembled
Recommended accessories	Damper DA 2/60 for the outfeeding of the workpiece pallets WT 2 and WT 2/E at v<sub>N</sub> > 9 m/min,Rocker WI 2/…, WI/M and damper DA 2/60 for the infeeding of workpiece pallets WT 2 and WT 2/E
Required accessories	1x M12x1 sensor with rated sensing range S for each (top/bottom) position inquiry<sub>N</sub> = 4 mm
Preferred values	160,240

• Complete macro module for connecting two parallel longitudinal sections at a distance of 90 mm from one other
• With driven intermediate sections
• Modular unit with three lifting cylinders
• Conveyor medium: Toothed belt (suitable for use in an EPA)
• Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions
• Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
• n.a.
• Reversible operation possible
• Accumulation operation not permitted
• - n.a.

EQ 2/TR-90 Electrical Transverse Conveyor
Accumulation operation not permitted, Pneumatic equipment for 2 (top, center) or 3 (top, center, bottom) lift positions, Conveyor medium: Toothed belt (suitable for use in an EPA), Reversible operation possible, Suitable for mounting on an ST 2/… section

• 3D CAD
• Data Sheet

Recommended accessories

Damper DA 2/60 for the outfeeding of the workpiece pallets WT 2 and WT 2/E at vN > 9 m/min

Rocker WI 2/…, WI/M and damper DA 2/60 for the infeeding of workpiece pallets WT 2 and WT 2/E

M12 sensor with M12x1 push-in fitting

M12 sensor with M12x1 push-in fitting

CAD data

EQ 2/TR-90 Electrical Transverse Conveyor

Presentation for AO = 0

L Transport direction of longitudinal conveyor

Q Transport direction of transverse conveyor

1 HQ 2/O lift transverse unit

2 Connection kit

3 Motor attachment kit

4 Drive motor

5 HQ 2/T lift transverse unit

6 Drive kit

7 Housing element

Energy efficiency – Rexroth 4EE

Circuit diagram for unit with pneumatic equipment for two positions PN = 2

1)	Not included in the scope of delivery

Circuit diagram for unit with pneumatic equipment for three positions PN = 3

1)	Not included in the scope of delivery

Pneumatic equipment

PN = 2	PN = 3

No.			3842998289
Max. total weight of workpiece pallet	mG	kg	30
ESD			yes
Reversible operation			Reversible operation possible
Required compressed air connection	p	bar	4 ... 6 bar
Pneumatic push-in fitting	Ø	mm	6

Compressed air consumption of TS 2plus units

Motor connection

Transport and nominal speed vN

Motor data