Attributes

Productgroup ID	2
required compressed air connection [pmax]	6bar
required compressed air connection [pmin]	5bar
Weight	0kg
Scope of delivery	Incl. fastening material for mounting the PE 5/L in ST 5/XH conveyor sections
Delivery information	Fully assembled
Recommended accessories	Lateral guide cover,Protective sleeves
Required accessories	VE 5/200, VE 5/D‑300, VE 5/D‑301 or VE 5/D‑1000 stop gate,SH 2/U-H switch bracket
Length in direction of transport [lT]	455,650,845,1040
Track width [b]	455,650,845
Positioning unit width [bPE]	441,441,636,636,831,831
Preferred values	455,650,845
Positioning unit length [lPE]	471,576,576,764,764,966

• Positioning a workpiece pallet in a manual or automated processing station in the longitudinal conveyor with high positioning accuracy requirements (±0.3 mm)
• Can be used with all WT 5 workpiece pallets
• Installation only possible from above
• Lift over transport level: 5 mm
• Positioning accuracy: ±0.3 mm in x and y direction
• Permissible vertical process force with center load:
  up to 3500 N²⁾ depending on WT weight, i.e. permitted load of 3500 N – weight WT = possible process force
• Suitable for ST 5/XH and ST 5/H (not ST 5/XH‑FR or ST 5/H‑FR)
• Compressed air connection: 5 ... 6 bar
• Push in air connection: 8 mm
• ²⁾ If assembling in a ST 5/H section place legs directly in front of and behind the PE 5/L.
• Permissible vertical process force with center load:
  up to 3500 N2) depending on WT weight, i.e. permitted load of 3500 N – weight WT = possible process force - Permissible vertical process force with center load:
  up to 3500 N²⁾ depending on WT weight, i.e. permitted load of 3500 N – weight WT = possible process force
• 2) If assembling in a ST 5/H section place legs directly in front of and behind the PE 5/L. - ²⁾ If assembling in a ST 5/H section place legs directly in front of and behind the PE 5/L.

PE 5/L positioning unit
Can be used with all WT 5 workpiece pallets, Compressed air connection: 5 ... 6 bar, Positioning a workpiece pallet in a manual or automated processing station in the longitudinal conveyor with high positioning accuracy requirements (±0.3 mm), Lift over t

• 3D CAD
• Data Sheet

Required accessories

VE 5/D-1000 stop gate, VE 5/D-300 stop gate, VE 5/D-301 stop gate or VE 5/200 stop gate

SH 2/U-H switch bracket

Recommended accessories

Lateral guide cover

Protective sleeves

Condition of Delivery

Fully assembled

Scope of delivery

Incl. fastening material for mounting the PE 5/L in ST 5/XH conveyor sections

PE 5/L positioning unit

bWT (mm)	lWT (mm)	bPE (mm)	lPE (mm)
455	455	441	471
455	650	441	576
650	650	636	576
650	845	636	764
845	845	831	764
845	1040	831	966
bWT = Breite Werkstückträger
lWT = workpiece pallet length
bPE = Breite Positioniereinheit
lPE = Länge Positioniereinheit

Set-up, positioning, and orientation

S1	=	WT before VE
S2	=	WT arrival
S3	=	Lift end position at bottom
S4	=	Lift end position at top
S5	=	WT after VE
Y1	=	Open VE (Z1)
Y2	=	WT lift (Z2)
Y3	=	Open VE (Z3)
A1	=	Start of processing
A2	=	End of processing

No.
3842998048