Attributes

Track width in direction of transport [b max]	1200mm
Track width in direction of transport [b min]	160mm
Productgroup ID	2
Section load in accumulation operation	700kg
Dry room	<1
ESD	yes
Conveyor medium length [lAS]	625mm
Weight	0kg
Notice	Individual width variants can be ordered,Chain suitable for use in an EPA (KA = A)
Scope of delivery	Incl. all fastening material to mount on ST 2/... conveyor section
Delivery information	Fully assembled
Recommended accessories	Connection Kits,LU 2 Automatic Lubrication Unit
Preferred values	160,240,320,400,480,640,800,1040,1200

• Drive for conveyor unit self-assembly
• Conveyor medium: Flat top chain (where KA = A suitable for use in an EPA)
• Motor mounting on right, left or centrally (centrally on track widths of 240 mm and above)
• Motor connection: optionally with cable/plug or terminal box motor connection
• Special models on request
• Reversible operation not permitted
• Use with high accumulation loads
• We strongly advise using the LU 2 automatic lubrication unit

Drive Module AS 2/C-700
Special models on request, Motor connection: optionally with cable/plug or terminal box motor connection, Motor mounting on right, left or centrally (centrally on track widths of 240 mm and above), Reversible operation not permitted, We strongly advise us

• 3D CAD
• Data Sheet

LU 2 Automatic Lubrication Unit

LU 2 Automatic Lubrication Unit

Modular design made up of LU 2 automatic lubrication unit, LC 2 oil container and adapter set LU 2 automatic lubrication unit with drive, compressed-air connection to drive module and fastening material

CAD data

Connection Kits for Longitudinal Conveyors

Connection Kits for Longitudinal Conveyors

For connecting the modules of the TS 2plus on a longitudinal conveyor at the ends (end-to-end)

CAD data

Condition of Delivery

Fully assembled

Scope of delivery

Incl. all fastening material to mount on ST 2/... conveyor section

The AS 2/B-... drive module drives the flat top chain conveyor medium in self-built conveyor units with sections, return units and flat top chains.

Energy efficiency – Rexroth 4EE

No.			3842998039
Max. section load in accumulation operation		kg	700
ESD 1)			yes
Required conveyor media length 2)	lAS	mm	625

1)	Chain is suitable for use in an EPA (KA = A)
2)	Formula for calculating the conveyor medium, see table

Die benötigte Kettenlänge wird mittels nachstehender Formel ermittelt.	Länge des Fördermediums für Flachplattenketten
lC = 2 x lS + lAS + lUM	lUM2/C-170 = 310 mm lUM2/C-60 = 150 mm lAS = 625 mm
lC = Länge der Flachplattenkette lS = Länge des Streckenprofils lAS = Länge des Fördermediums in der Antriebsstation lUM = Länge des Fördermediums bei der Umlenkung

Motor connection

Transport and nominal speed vN

Motor data