SLIDING RAIL 90+ STS 30° TOP

Easy assembly - simply clip onto the section profile, Gliding surface machining: not required, One cross-section for all AL and STS section profiles, Secured against axial shifting via lateral fixing / Material Number:3842557032

SLIDING RAIL 90+ STS 30° TOP

Material #3842557032

Request Quote

Attributes

Condition on delivery Single rod in standard length
Productgroup ID 2
Packaging unit 1
Material Non-rusting steel 1.4301
Weight 0.036kg
Size [b] 90
  • Easy assembly - simply clip onto the section profile
  • Secured against axial shifting via lateral fixing
  • Gliding surface machining: not required
  • One cross-section for all AL and STS section profiles
Slide rail curve wheel VF90 steel 30°
Easy assembly simply clip onto the section profile, Gliding surface machining: not required, One cross section for all AL and STS section profiles, Secured against axial shifting via lateral fixing

Required accessories

Pop rivet D3x8mm

 

Number of rivets

Straight slide rail section: 1 rivet

30°, 45° curve: 2 rivets

90° curve: 3 rivets

180° curve: 6 rivets

 

Note: Ensure gap-free assembly (without expansion joint), as foreign bodies could otherwise get trapped in the gap and damage the chain.

Note: Non-destructive dismantling of the slide rail is not possible. A target separation point of the system must therefore be defined before assembly. Overlap the steel slide rail by 10 … 15 mm on the section profile separation point. This ensures that it is still possible to pull apart the two parts.

 

Extend the steel slide rail over the component interfaces to ensure minimum wear and reduced noise emissions. Interruptions directly on the profile or component connection must be avoided.

The steel slide rail is suitable for use in abrasive ambient conditions (reduced service life of the conveyor chain). It is clipped in to the section profile and fixed in place at the side via a pop rivet. The side fixing reduces the friction and the noise level to a minimum. The steel slide rail butt joints are merely chamfered. The Advanced slide rail is used in the lower run of the curve wheels.

 

Steel slide rail straight section (A) Steel slide rail curve wheel (B) 30°, 45°, 90°, 180° Dry, wet and abrasive environment Size:

- Straight section: all track widths

- Curve wheel 65, 90, 120

Not suitable for use in horizontal sliding curves Only Advanced or Premium slide rails can be used in vertical curves

Slide rail VFplus Curve wheel

Request Quote

How to Find Us

If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.

Headquarters

1505 W. Hamlin Road
Rochester Hills, MI 48309

Phone
248-584-5600
Fax
248-584-1117

West Michigan Office

Phone
269-381-1285
Fax
269-381-1379

Have questions?