Productgroup ID | 2 |
Weight | 0.805kg |
Size [b] | 320 |
CAD data
CAD data
CAD data
CAD data
Note: High-pressure cleaning of the ball bearings is not permitted.
Note: A chain sprocket must be used to limit the chain slipping back on inclined sections.
The base unit is quickly turned into a head drive with variable mounting position by adding a drive kit.
With the double-sided hexagonal hollow shaft, other components can be easily driven using a transmission (active bridge).
Size: all track widths Suitable chain types: all Permissible chain tensile force: Fmax = 1250 N Section length: L ≤ 30 m Conveying speed: vN 4-27 m/min, other speeds available on request Chain bag to compensate for chain elongation during service life Not suitable for reversible operationInnovative drive concept
Conveyor noise level
Straight |
Curves |
Drives |
Return Unit |
||||||||||||
Section profile AL open |
Section profile AL closed |
Assembly module |
Curve wheel |
Roller curve* |
Horizontal sliding curve |
Vertical curve |
Head drive |
Curve wheel drive |
Connection drive |
Center drive (STS)** |
Basic unit |
90° (STS)** |
Transmission kit |
||
Straight |
Section profile AL open |
J |
|||||||||||||
Section profile AL closed |
J |
J |
|||||||||||||
Assembly module |
J |
J |
N |
||||||||||||
Curves |
Curve wheel |
J |
J |
L2) |
L2) |
||||||||||
Roller curve* |
J |
N |
J |
N |
L1) |
||||||||||
Horizontal sliding curve |
J |
J |
J |
J |
N |
L1) |
|||||||||
Vertical curve |
J |
J |
J |
J |
L1) |
L1) |
L1) |
||||||||
Drives |
Head drive |
J |
J |
L2) |
L2) |
L1, 4) |
L1) |
L1, 4) |
N |
||||||
Curve wheel drive |
J |
J |
L2) |
L2) |
N |
L1) |
L1) |
N |
N |
||||||
Connection drive |
J |
J |
L2) |
L2) |
N |
L1) |
L1) |
N |
N |
N |
|||||
Center drive (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
N |
L1, 5) |
L1, 5) |
N |
N |
N |
N |
||||
Return Unit |
Basic unit |
J |
J |
L2) |
L2) |
L1, 4) |
L1) |
L1, 4) |
L2) |
N |
N |
L2, 3) |
L2, 3) |
||
90° (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
N |
L1, 5) |
L1, 5) |
N |
N |
L2, 5) |
N |
N |
L2) |
||
Transmission kit |
N |
N |
N |
N |
N |
N |
N |
J |
N |
J |
N |
J |
N |
N |
|
J |
possible without restrictions |
* Support profile must project 76+2 mm into the roller curve. |
|||||||||||||
L |
possible with restrictions |
** AL-STS adapter included in the scope of delivery. |
|||||||||||||
N |
not possible |
1) | Profile connector not required |
2) | Use of a profile piece (Lmin = 120 mm) |
3) | Assembly module required |
4) | For sizes 160-320: shorten the support rail on the dotted line |
5) | Use of the AL-STS adapter |
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.