CAM WHEEL 90+ AL 180° ESD
| Deflection angle [α] | 180° |
| Productgroup ID | 2 |
| Effective sliding rail length | 2x 0,91m |
| Actual chain length | 2x 0,72m |
| Modification | Additional versions are available on request from our modification department. ([email protected]) |
| ESD | yes |
| Weight | 4.62kg |
| Scope of delivery | Incl. fastening material for mounting to the AL section profile |
| Delivery information | Fully assembled |
| Size [b] | 90 |
| Dimension [A] | 210.5 |
| Material information | Housing: Diecast aluminum,Chain wheel: PA ESD, black,Ball bearing: Non-rusting steel 1.4301/FDA |
- The curve wheel AL ESD provides a horizontal direction change for the conveyor chain
- It enables low-friction direction changes with very small radii
- No interfering contours above chain plate height
No interfering contours above chain plate height, The curve wheel AL ESD provides a horizontal direction change for the conveyor chain, It enables low friction direction changes with very small radii
Curve wheel AL VFplus 180°
Curve wheel AL VFplus 90°
Curve wheel AL VFplus 45°
Curve wheel AL VFplus 30°
Curve wheel AL
Note: High-pressure cleaning of the ball bearings is not permitted.
The curve wheel AL ESD provides a horizontal direction change for the conveyor chain. It enables low-friction direction changes with very small radii.
For attachment options, see the matrix
Size: 65, 90 See table for the deflection angles, more deflection angles available on request Suitable chain type: ESD conveyor chain For circuit systems without conveyor chain return in bottom run (using a curve wheel or connection drive), the appropriate cover must be used for personal safety reasons With conductive wheelCombination matrix
|
Straight |
Curves |
Drives |
Return Unit |
||||||||
|
Section profile AL open |
Section profile AL closed |
Assembly module |
Curve wheel ESD |
Vertical curve |
Head drive (STS) |
Connection drive (STS) |
Center drive (STS)** |
Base unit (STS) |
90° (STS)** |
||
|
Straight |
Section profile AL open |
J |
|||||||||
|
Section profile AL closed |
J |
J |
|||||||||
|
Assembly module |
J |
J |
N |
||||||||
|
Curves |
Curve wheel ESD |
J |
J |
L2) |
L2) |
||||||
|
Vertical curve |
J |
J |
L2) |
L2) |
L1) |
||||||
|
Drives |
Head drive (STS) |
L5) |
L5) |
L2, 5) |
L2, 5) |
L1, 5) |
N |
||||
|
Connection drive (STS) |
L5) |
L5) |
L2, 5) |
L2, 5) |
L1, 5) |
N |
N |
||||
|
Center drive (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
L1, 5) |
N |
N |
N |
|||
|
Return Unit |
Base unit (STS) |
L5) |
L5) |
L2, 5) |
L2, 5) |
L1, 5) |
L2) |
N |
L2) |
L2, 3) |
|
|
90° (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
L1, 5) |
L2) |
L2) |
N |
N |
L2) |
|
|
J |
possible without restrictions |
* Support profile must project 76+2 mm into the roller curve. |
|||||||||
|
L |
possible with restrictions |
** AL-STS adapter included in the scope of delivery. |
|||||||||
|
N |
not possible |
||||||||||
| 1) | Profile connector not required |
| 2) | Use of a profile piece (Lmin = 224 mm) |
| 3) | Assembly module required |
| 4) | For sizes 160-320: shorten the support rail on the dotted line |
| 5) | Use of the AL-STS adapter |
| 6) | Replace the standard profile connector with STS Clean Section profile connector |
| 7) | Directly possible with left-right change (one profile connector is no longer required) |
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.