Attributes

Condition on delivery	Single rod in standard length
Productgroup ID	2
Packaging unit	1
Material	Non-rusting steel 1.4301
Weight	0.0712kg
Size [b]	65

• Easy assembly - simply clip onto the section profile
• Secured against axial shifting via lateral fixing
• Gliding surface machining: not required
• One cross-section for all AL and STS section profiles

Slide rail curve wheel VF65 steel 90°
Easy assembly simply clip onto the section profile, Gliding surface machining: not required, One cross section for all AL and STS section profiles, Secured against axial shifting via lateral fixing

• 3D CAD
• Data Sheet

Required accessories

Pop rivet D3x8mm

 

Number of rivets

Straight slide rail section: 1 rivet

30°, 45° curve: 2 rivets

90° curve: 3 rivets

180° curve: 6 rivets

 

Note: Ensure gap-free assembly (without expansion joint), as foreign bodies could otherwise get trapped in the gap and damage the chain.

Note: Non-destructive dismantling of the slide rail is not possible. A target separation point of the system must therefore be defined before assembly. Overlap the steel slide rail by 10 … 15 mm on the section profile separation point. This ensures that it is still possible to pull apart the two parts.

 

Extend the steel slide rail over the component interfaces to ensure minimum wear and reduced noise emissions. Interruptions directly on the profile or component connection must be avoided.

The steel slide rail is suitable for use in abrasive ambient conditions (reduced service life of the conveyor chain). It is clipped in to the section profile and fixed in place at the side via a pop rivet. The side fixing reduces the friction and the noise level to a minimum. The steel slide rail butt joints are merely chamfered. The Advanced slide rail is used in the lower run of the curve wheels.

 

Steel slide rail straight section (A) Steel slide rail curve wheel (B) 30°, 45°, 90°, 180° Dry, wet and abrasive environment Size:

- Straight section: all track widths

- Curve wheel 65, 90, 120

Not suitable for use in horizontal sliding curves Only Advanced or Premium slide rails can be used in vertical curves

Slide rail VFplus Steel with pop rivet (C)

Slide rail VFplus Curve wheel

	Material
Slide rail VFplus Steel	Stainless steel
Slide rail curve wheel VF65 steel 30°
Slide rail curve wheel VF65 steel 45°
Slide rail curve wheel VF65 steel 90°
Slide rail curve wheel VF65 steel 180°
Slide rail curve wheel VF90 steel 30°
Slide rail curve wheel VF90 steel 45°
Slide rail curve wheel VF90 steel 90°
Slide rail curve wheel VF90 steel 180°
Slide rail curve wheel VF120 steel 30°
Slide rail curve wheel VF120 steel 45°
Slide rail curve wheel VF120 steel 90°
Slide rail curve wheel VF120 steel 180°
Pop rivet D3x8mm