TRANSMISSION DRIVE VF+ TRANSMISSION KIT
| Productgroup ID | 2 |
| Weight | 12kg |
| Scope of delivery | Incl. fastening material |
| Delivery information | Fully assembled |
| Size [b] | 65,90,120,160,240,320 |
| Material information | Side plate: Non-rusting steel 1.4301,Belt: rubber compound,Cover: ABS,Connecting parts: Aluminum |
| Preferred values | 65,90,120 |
- Installation of the drive kit possible on the right/left (motor, coupling, flange)
- Ball bearing made of non-rusting steel (1.4301), with seal on both sides and FDA-compliant grease filling
- Very quiet, as transmission takes place through toothed belt
Ball bearing made of non rusting steel (1.4301), with seal on both sides and FDA compliant grease filling, Installation of the drive kit possible on the right/left (motor, coupling, flange), Very quiet, as transmission takes place through toothed belt
Condition of Delivery
| Fully assembled |
Scope of delivery
| Incl. fastening material |
Transmission kit
|
No. |
b |
| 3842552900 | 65, 90, 120 |
Transmission kit, specifications about support height
H = Transport height (top edge of chain)S = Support height
L = Profile length (L = S - 15)
Motor support
The support is mounted on the inside (below the chain).
Note: The motor must be mounted so that there are no collisions with the support.
Note: High-pressure cleaning of the ball bearings is not permitted.
If the available space is not sufficient for mounting the drive kit directly on the basic unit, the transmission kit also enables conversion to a transmission drive at a later date. The basic units head drive, connection drive and closed head drive are quickly turned into a transmission drive with variable mounting position with the transmission kit and drive kit.
Only for AL systems Sizes 65, 90, 120 Permissible chain tensile force: Fmax = 1250 N Support required Not suitable for wet operation/cleaning Mounting on STS version on request|
Material |
|
| Transmission kit VFplus |
Side plate: stainless steel Belt: rubber compound Cover: ABS Connecting parts: aluminum |
Combination matrix
|
Straight |
Curves |
Drives |
Return Unit |
||||||||||||
|
Section profile AL open |
Section profile AL closed |
Assembly module |
Curve wheel |
Roller curve* |
Horizontal sliding curve |
Vertical curve |
Head drive |
Curve wheel drive |
Connection drive |
Center drive (STS)** |
Basic unit |
90° (STS)** |
Transmission kit |
||
|
Straight |
Section profile AL open |
J |
|||||||||||||
|
Section profile AL closed |
J |
J |
|||||||||||||
|
Assembly module |
J |
J |
N |
||||||||||||
|
Curves |
Curve wheel |
J |
J |
L2) |
L2) |
||||||||||
|
Roller curve* |
J |
N |
J |
N |
L1) |
||||||||||
|
Horizontal sliding curve |
J |
J |
J |
J |
N |
L1) |
|||||||||
|
Vertical curve |
J |
J |
J |
J |
L1) |
L1) |
L1) |
||||||||
|
Drives |
Head drive |
J |
J |
L2) |
L2) |
L1, 4) |
L1) |
L1, 4) |
N |
||||||
|
Curve wheel drive |
J |
J |
L2) |
L2) |
N |
L1) |
L1) |
N |
N |
||||||
|
Connection drive |
J |
J |
L2) |
L2) |
N |
L1) |
L1) |
N |
N |
N |
|||||
|
Center drive (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
N |
L1, 5) |
L1, 5) |
N |
N |
N |
N |
||||
|
Return Unit |
Basic unit |
J |
J |
L2) |
L2) |
L1, 4) |
L1) |
L1, 4) |
L2) |
N |
N |
L2, 3) |
L2, 3) |
||
|
90° (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
N |
L1, 5) |
L1, 5) |
N |
N |
L2, 5) |
N |
N |
L2) |
||
|
Transmission kit |
N |
N |
N |
N |
N |
N |
N |
J |
N |
J |
N |
J |
N |
N |
|
|
J |
possible without restrictions |
* Support profile must project 76+2 mm into the roller curve. |
|||||||||||||
|
L |
possible with restrictions |
** AL-STS adapter included in the scope of delivery. |
|||||||||||||
|
N |
not possible |
||||||||||||||
| 1) | Profile connector not required |
| 2) | Use of a profile piece (Lmin = 120 mm) |
| 3) | Assembly module required |
| 4) | For sizes 160-320: shorten the support rail on the dotted line |
| 5) | Use of the AL-STS adapter |
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.