RETURN 320+ STS
| Productgroup ID | 2 |
| Effective sliding rail length | 4x 0,2m |
| Actual chain length | 0,742m |
| Weight | 5.4kg |
| Scope of delivery | Incl. fastening material |
| Delivery information | Assembled, connector enclosed |
| Required accessories | Slide rail,For use as a drive:Assembly moduleDrive kitMotor support |
| Size [b] | 320 |
| Material information | Chain wheel: PA,Chain guide: PA,Hexagonal shaft up to size 160: PA, from size 160: Non-rusting steel 1.4301 + PA,Ball bearing: Non-rusting steel 1.4301/FDA,Housing: Non-rusting steel 1.4301,Connector: Non-rusting steel 1.4301 |
| Track width in direction of transport [b] | 320 |
- Reduced noise emission due to slide rails guided in the return unit
- Installation of the drive kit possible on the right/left (motor, coupling, flange)
- Drive of a parallel conveyor section or bridge using a hexagonal hollow shaft integrated as standard
- Ball bearing made of non-rusting steel (1.4301), with seal on both sides and FDA-compliant grease filling
- Implementation of parallel sections possible through a pluggable shaft
- Side elements with mounting option for attaching holders for lateral guides, or similar
Ball bearing made of non rusting steel (1.4301), with seal on both sides and FDA compliant grease filling, Installation of the drive kit possible on the right/left (motor, coupling, flange), Drive of a parallel conveyor section or bridge using a hexagonal
Drive kit
Drive kit
CAD data
Slide rail
Slide rail
Easy assembly - simply clip onto the section profile Secured against axial shifting due to lateral boltingCAD data
Assembly module
Assembly module
Assembly instructions
Section support STS
Section support STS
Few screwed connections Easy to clean thanks to ample draining surfaces Simple fastening of workpiece supports thanks to 10 mm profile slots in the workpiece pallet frame Supports can also be used in conjunction with AL sectionsCAD data
Return unit STS
Thanks to the innovative drive concept, the return unit can be operated simply by itself or supplemented with a drive kit to be operated as a head drive without chain bag. The section length is limited to a maximum of 7 m.
Size: all track widths Suitable chain types: all Permissible chain tensile forceReturn unit function: Fmax = 1250 N
Head drive function without chain bag: Fmax = 600 N
With shortened maintenance interval, due to chain elongation
Section length for return unit function: L ≤ 30 mSection length for drive function: L ≤ 7 m
Conveying speed: vN = 2-60 m/min, other speeds available on request Use in combination with the drive kit as a wedge conveyor drive Not suitable for reversible operationThe standard drives are easy to couple and enable straightforward implementation of multi-track systems
Complete drive consisting of head drive direct and configurable drive kit
Complete drive consisting of return unit and configurable drive kit
Innovative drive concept
Combination matrix
|
Straight |
Curves |
Drives |
Return Unit |
|||||||||
|
Section profile STS open |
Section profile STS Clean |
Assembly module |
Curve wheel |
Roller curve* |
Vertical curve |
Head drive |
Connection drive |
Center drive** |
Basic unit |
90° ** |
||
|
Straight |
Section profile STS open |
J |
||||||||||
|
Section profile STS Clean |
L6) |
L6) |
||||||||||
|
Assembly module |
J |
L6) |
N |
|||||||||
|
Curves |
Curve wheel |
J |
L6) |
J |
L2, 7) |
|||||||
|
Roller curve* |
J |
N |
J |
N |
L1) |
|||||||
|
Vertical curve |
J |
L6) |
J |
L1) |
L1) |
L1) |
||||||
|
Drives |
Head drive |
J |
L6) |
J |
L1) |
L1, 4) |
L1, 4) |
N |
||||
|
Connection drive |
J |
L6) |
J |
L1) |
N |
L1) |
N |
N |
||||
|
Center drive** |
J |
L6) |
J |
L1) |
N |
L1) |
N |
N |
N |
|||
|
Return Unit |
Basic unit |
J |
L6) |
J |
L1) |
L1, 4) |
L1, 4) |
L1) |
L1) |
L1, 3) |
L1, 3) |
|
|
90° ** |
J |
L6) |
J |
L1) |
N |
L1) |
L1) |
L1) |
N |
N |
L1) |
|
|
J |
possible without restrictions |
* Support profile must project 76+2 mm into the roller curve. |
||||||||||
|
L |
possible with restrictions |
** AL-STS adapter included in the scope of delivery. |
||||||||||
|
N |
not possible |
|||||||||||
| 1) | Profile connector not required |
| 2) | Use of a profile piece (Lmin = 224 mm) |
| 3) | Assembly module required |
| 4) | For sizes 160-320: shorten the support rail on the dotted line |
| 5) | Use of the AL-STS adapter |
| 6) | Replace the standard profile connector with STS Clean Section profile connector |
| 7) | Directly possible with left-right change (one profile connector is no longer required) |
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.