RETURN 65+ STS

Ball bearing made of non-rusting steel (1.4301), with seal on both sides and FDA-compliant grease filling, Installation of the drive kit possible on the right/left (motor, coupling, flange), Drive of a parallel conveyor section or bridge using a hexagonal / Material Number:3842547528

RETURN 65+ STS

Material #3842547528

Request Quote

Attributes

Productgroup ID 2
Effective sliding rail length 0,742m
Actual chain length 2x 0,2m
Modification Additional versions are available on request from our modification department. ([email protected])
Weight 2.68kg
Scope of delivery Incl. fastening material
Delivery information Assembled, connector enclosed
Required accessories Slide rail,For use as a drive:Assembly moduleDrive kitMotor support
Size [b] 65
Material information Chain wheel: PA,Chain guide: PA,Hexagonal shaft up to size 160: PA, from size 160: Non-rusting steel 1.4301 + PA,Ball bearing: Non-rusting steel 1.4301/FDA,Housing: Non-rusting steel 1.4301,Connector: Non-rusting steel 1.4301
Track width in direction of transport [b] 65
  • Reduced noise emission due to slide rails guided in the return unit
  • Installation of the drive kit possible on the right/left (motor, coupling, flange)
  • Drive of a parallel conveyor section or bridge using a hexagonal hollow shaft integrated as standard
  • Ball bearing made of non-rusting steel (1.4301), with seal on both sides and FDA-compliant grease filling
  • Implementation of parallel sections possible through a pluggable shaft
  • Side elements with mounting option for attaching holders for lateral guides, or similar
Return unit STS; VFplus 65
Ball bearing made of non rusting steel (1.4301), with seal on both sides and FDA compliant grease filling, Installation of the drive kit possible on the right/left (motor, coupling, flange), Drive of a parallel conveyor section or bridge using a hexagonal

Drive kit

Drive kit

CAD data

Slide rail

Slide rail

Easy assembly - simply clip onto the section profile Secured against axial shifting due to lateral bolting

CAD data

Assembly module

Assembly module

Assembly instructions

Section support STS

Section support STS

Few screwed connections Easy to clean thanks to ample draining surfaces Simple fastening of workpiece supports thanks to 10 mm profile slots in the workpiece pallet frame Supports can also be used in conjunction with AL sections

CAD data

Return unit STS

Thanks to the innovative drive concept, the return unit can be operated simply by itself or supplemented with a drive kit to be operated as a head drive without chain bag. The section length is limited to a maximum of 7 m.

Size: all track widths Suitable chain types: all Permissible chain tensile force

      Return unit function: Fmax = 1250 N

      Head drive function without chain bag: Fmax = 600 N

      With shortened maintenance interval, due to chain elongation

Section length for return unit function: L ≤ 30 m

      Section length for drive function: L ≤ 7 m

Conveying speed: vN = 2-60 m/min, other speeds available on request Use in combination with the drive kit as a wedge conveyor drive Not suitable for reversible operation

The standard drives are easy to couple and enable straightforward implementation of multi-track systems

Complete drive consisting of head drive direct and configurable drive kit

Complete drive consisting of return unit and configurable drive kit

Innovative drive concept

Combination matrix

Straight

Curves

Drives

Return Unit

Section profile STS open

Section profile STS Clean

Assembly module

Curve wheel

Roller curve*

Vertical curve

Head drive

Connection drive

Center drive**

Basic unit

90° **

Straight

Section profile STS open

J

Section profile STS Clean

L6)

L6)

Assembly module

J

L6)

N

Curves

Curve wheel

J

L6)

J

L2, 7)

Roller curve*

J

N

J

N

L1)

Vertical curve

J

L6)

J

L1)

L1)

L1)

Drives

Head drive

J

L6)

J

L1)

L1, 4)

L1, 4)

N

Connection drive

J

L6)

J

L1)

N

L1)

N

N

Center drive**

J

L6)

J

L1)

N

L1)

N

N

N

Return Unit

Basic unit

J

L6)

J

L1)

L1, 4)

L1, 4)

L1)

L1)

L1, 3)

L1, 3)

90° **

J

L6)

J

L1)

N

L1)

L1)

L1)

N

N

L1)

J

possible without restrictions

* Support profile must project 76+2 mm into the roller curve.

L

possible with restrictions

** AL-STS adapter included in the scope of delivery.

N

not possible

1) Profile connector not required
2) Use of a profile piece (Lmin = 224 mm)
3) Assembly module required
4) For sizes 160-320: shorten the support rail on the dotted line
5) Use of the AL-STS adapter
6) Replace the standard profile connector with STS Clean Section profile connector
7) Directly possible with left-right change (one profile connector is no longer required)

Request Quote

How to Find Us

If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.

Headquarters

1505 W. Hamlin Road
Rochester Hills, MI 48309

Phone
248-584-5600
Fax
248-584-1117

West Michigan Office

Phone
269-381-1285
Fax
269-381-1379

Have questions?