CAM WHEEL 90+ STS 90°
| Deflection angle [α] | 90° |
| Productgroup ID | 2 |
| Effective sliding rail length | 2x 0,58m |
| Actual chain length | 2x 0,46m |
| Modification | Additional versions are available on request from our modification department. ([email protected]) |
| Weight | 4.6kg |
| Scope of delivery | Incl. fastening material for mounting to STS section profiles |
| Delivery information | Fully assembled |
| Size [b] | 90 |
| Dimension [A] | 210.5 |
| Material information | Housing: Non-rusting steel 1.4301,Chain wheel: PA, white,Ball bearing: Non-rusting steel 1.4301/FDA |
- Easy-to-clean design
- Ball bearing made of non-rusting steel (1.4301), with seal on both sides and FDA-compliant grease filling
- Surfaces in contact with chain made of FDA-compliant materials
- No interfering contours above chain plate height
- Can be used horizontally and vertically (for wedge conveyors)
Ball bearing made of non rusting steel (1.4301), with seal on both sides and FDA compliant grease filling, No interfering contours above chain plate height, Can be used horizontally and vertically (for wedge conveyors), Surfaces in contact with chain made
Curve wheel STS
Curve wheel STS VFplus 30°
Curve wheel STS VFplus 45°
Curve wheel AL VFplus 90°
Curve wheel STS VFplus 180°
|
b |
α |
A |
B |
C |
R |
|
mm |
° |
mm |
mm |
mm |
mm |
| 65 | 30 | 185.5 | 322.5 | 279.4 | 153 |
| 45 | 185.5 | 322.5 | 301.9 | 153 | |
| 90 | 185.5 | 322.5 | 285.5 | 153 | |
| 180 | 185.5 | 287.5 | 153 | ||
| 90 | 30 | 210.5 | 347.5 | 291.9 | 165.5 |
| 45 | 210.5 | 347.5 | 319.6 | 165.5 | |
| 90 | 210.5 | 347.5 | 310.5 | 165.5 | |
| 180 | 210.5 | 310.5 | 165.5 | ||
| 120 | 30 | 240.5 | 377.5 | 306.9 | 180.5 |
| 45 | 240.5 | 377.5 | 340.8 | 180.5 | |
| 90 | 240.5 | 377.5 | 340.5 | 180.5 | |
| 180 | 240.5 | 340.5 | 180.5 |
Note: High-pressure cleaning of the ball bearings is not permitted.
The curve wheel is used for the horizontal change in direction of the chain. It enables low-friction direction changes with very small radii.
Size: 65, 90, 120 For deflection angles, see table Other deflection angles on request Suitable chain types: allCombination matrix
|
Straight |
Curves |
Drives |
Return Unit |
|||||||||
|
Section profile STS open |
Section profile STS Clean |
Assembly module |
Curve wheel |
Roller curve* |
Vertical curve |
Head drive |
Connection drive |
Center drive** |
Basic unit |
90° ** |
||
|
Straight |
Section profile STS open |
J |
||||||||||
|
Section profile STS Clean |
L6) |
L6) |
||||||||||
|
Assembly module |
J |
L6) |
N |
|||||||||
|
Curves |
Curve wheel |
J |
L6) |
J |
L2, 7) |
|||||||
|
Roller curve* |
J |
N |
J |
N |
L1) |
|||||||
|
Vertical curve |
J |
L6) |
J |
L1) |
L1) |
L1) |
||||||
|
Drives |
Head drive |
J |
L6) |
J |
L1) |
L1, 4) |
L1, 4) |
N |
||||
|
Connection drive |
J |
L6) |
J |
L1) |
N |
L1) |
N |
N |
||||
|
Center drive** |
J |
L6) |
J |
L1) |
N |
L1) |
N |
N |
N |
|||
|
Return Unit |
Basic unit |
J |
L6) |
J |
L1) |
L1, 4) |
L1, 4) |
L1) |
L1) |
L1, 3) |
L1, 3) |
|
|
90° ** |
J |
L6) |
J |
L1) |
N |
L1) |
L1) |
L1) |
N |
N |
L1) |
|
|
J |
possible without restrictions |
* Support profile must project 76+2 mm into the roller curve. |
||||||||||
|
L |
possible with restrictions |
** AL-STS adapter included in the scope of delivery. |
||||||||||
|
N |
not possible |
|||||||||||
| 1) | Profile connector not required |
| 2) | Use of a profile piece (Lmin = 224 mm) |
| 3) | Assembly module required |
| 4) | For sizes 160-320: shorten the support rail on the dotted line |
| 5) | Use of the AL-STS adapter |
| 6) | Replace the standard profile connector with STS Clean Section profile connector |
| 7) | Directly possible with left-right change (one profile connector is no longer required) |
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.