CURVE 320+ HOR AL 180° R500
| Deflection angle [α] | 180° |
| Productgroup ID | 2 |
| Effective sliding rail length | 5x 1,77m |
| Actual chain length | 2x 1,77m |
| Modification | Additional versions are available on request from our modification department. ([email protected]) |
| Weight | 9.794kg |
| Scope of delivery | Incl. fastening material for mounting to the AL section profile |
| Delivery information | Fully assembled |
| Required accessories | Slide rail: Length calculation |
| Size [b] | 320 |
| Dimension [A] | 1320 |
| Material information | Profile: Aluminum, anodized,Roller carrier: PA 66,Ball bearing: Non-rusting steel 1.4301/FDA,Connector: Steel, galvanized,Rollers: PA |
- Patented roller elements for low-friction, quieter changes in chain direction
- Ball bearing made of non-rusting steel (1.4301), with seal on both sides and FDA-compliant grease filling
- Surfaces in contact with chain made of FDA-compliant materials
Ball bearing made of non rusting steel (1.4301), with seal on both sides and FDA compliant grease filling, Patented roller elements for low friction, quieter changes in chain direction, Surfaces in contact with chain made of FDA compliant materials
Slide rail
Slide rail
Easy assembly - simply clip onto the section profile Secured against axial shifting due to lateral boltingCAD data
Roller curve AL
|
b |
α |
A |
C |
|
mm |
° |
mm |
mm |
| 160 | 30 | 476.6 | 266.3 |
| 45 | 580.8 | 353.7 | |
| 90 | 680 | 680 | |
| 180 | 1160 | 680 | |
| 240 | 30 | 496.6 | 340.9 |
| 45 | 609.1 | 422 | |
| 90 | 720 | 720 | |
| 180 | 1240 | 720 | |
| 320 | 30 | 516.6 | 415.6 |
| 45 | 637.4 | 490.3 | |
| 90 | 760 | 760 | |
| 180 | 1320 | 760 |
Roller curve AL VFplus 30°
Roller curve AL VFplus 45°
Roller curve AL VFplus 90°
Roller curve AL VFplus 180°
Note: High-pressure cleaning of the ball bearings is not permitted.
The low-friction roller curve is used for the horizontal change in direction of the chain. Roller elements with ball bearings enable longer conveyor sections. The service life of the chain is increased and system costs are reduced.
Size: 160, 240, 320 Deflection angles Other deflection angles on request Suitable chain types: all Version with open section profiles|
Material |
|
| Roller curve horizontal AL VFplus 160 30° |
Profile: Aluminum, anodized Roller carrier: PA 66 Ball bearings: stainless steel/FDA Connector: steel; galvanized Rollers: PA |
| Roller curve horizontal AL VFplus 160 45° | |
| Roller curve horizontal AL VFplus 160 90° | |
| Roller curve horizontal AL VFplus 160 180° | |
| Roller curve horizontal AL VFplus 240 30° | |
| Roller curve horizontal AL VFplus 240 45° | |
| Roller curve horizontal AL VFplus 240 90° | |
| Roller curve horizontal AL VFplus 240 180° | |
| Roller curve horizontal AL VFplus 320 30° | |
| Roller curve horizontal AL VFplus 320 45° | |
| Roller curve horizontal AL VFplus 320 90° | |
| Roller curve horizontal AL VFplus 320 180° |
Combination matrix
|
Straight |
Curves |
Drives |
Return Unit |
||||||||||||
|
Section profile AL open |
Section profile AL closed |
Assembly module |
Curve wheel |
Roller curve* |
Horizontal sliding curve |
Vertical curve |
Head drive |
Curve wheel drive |
Connection drive |
Center drive (STS)** |
Basic unit |
90° (STS)** |
Transmission kit |
||
|
Straight |
Section profile AL open |
J |
|||||||||||||
|
Section profile AL closed |
J |
J |
|||||||||||||
|
Assembly module |
J |
J |
N |
||||||||||||
|
Curves |
Curve wheel |
J |
J |
L2) |
L2) |
||||||||||
|
Roller curve* |
J |
N |
J |
N |
L1) |
||||||||||
|
Horizontal sliding curve |
J |
J |
J |
J |
N |
L1) |
|||||||||
|
Vertical curve |
J |
J |
J |
J |
L1) |
L1) |
L1) |
||||||||
|
Drives |
Head drive |
J |
J |
L2) |
L2) |
L1, 4) |
L1) |
L1, 4) |
N |
||||||
|
Curve wheel drive |
J |
J |
L2) |
L2) |
N |
L1) |
L1) |
N |
N |
||||||
|
Connection drive |
J |
J |
L2) |
L2) |
N |
L1) |
L1) |
N |
N |
N |
|||||
|
Center drive (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
N |
L1, 5) |
L1, 5) |
N |
N |
N |
N |
||||
|
Return Unit |
Basic unit |
J |
J |
L2) |
L2) |
L1, 4) |
L1) |
L1, 4) |
L2) |
N |
N |
L2, 3) |
L2, 3) |
||
|
90° (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
N |
L1, 5) |
L1, 5) |
N |
N |
L2, 5) |
N |
N |
L2) |
||
|
Transmission kit |
N |
N |
N |
N |
N |
N |
N |
J |
N |
J |
N |
J |
N |
N |
|
|
J |
possible without restrictions |
* Support profile must project 76+2 mm into the roller curve. |
|||||||||||||
|
L |
possible with restrictions |
** AL-STS adapter included in the scope of delivery. |
|||||||||||||
|
N |
not possible |
||||||||||||||
| 1) | Profile connector not required |
| 2) | Use of a profile piece (Lmin = 120 mm) |
| 3) | Assembly module required |
| 4) | For sizes 160-320: shorten the support rail on the dotted line |
| 5) | Use of the AL-STS adapter |
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.