CAM WHEEL 120+ AL 180°
| Deflection angle [α] | 180° |
| Productgroup ID | 2 |
| Effective sliding rail length | 2x 1,01m |
| Actual chain length | 2x 0,77m |
| Modification | Additional versions are available on request from our modification department. ([email protected]) |
| Weight | 3.8kg |
| Scope of delivery | Incl. fastening material for mounting to the AL section profile |
| Delivery information | Fully assembled |
| Size [b] | 120 |
| Dimension [A] | 240.5 |
| Material information | Housing: Diecast aluminum,Chain wheel: PA, white,Ball bearing: Non-rusting steel 1.4301/FDA |
- Ball bearing made of non-rusting steel (1.4301), with seal on both sides and FDA-compliant grease filling
- Surfaces in contact with chain made of FDA-compliant material
- No interfering contours above chain plate height
- Can be used horizontally and vertically (for wedge conveyors)
Ball bearing made of non rusting steel (1.4301), with seal on both sides and FDA compliant grease filling, Surfaces in contact with chain made of FDA compliant material, No interfering contours above chain plate height, Can be used horizontally and vertic
Curve wheel AL
|
b |
α |
A |
B |
C |
R |
|
mm |
° |
mm |
mm |
mm |
mm |
| 65 | 30 | 185.5 | 324.5 | 279.4 | 153 |
| 45 | 185.5 | 324.5 | 301.9 | 153 | |
| 90 | 185.5 | 324.5 | 285.5 | 153 | |
| 180 | 185.5 | 285.5 | 153 | ||
| 90 | 30 | 210.5 | 349.5 | 291.9 | 165.5 |
| 45 | 210.5 | 349.5 | 319.6 | 165.5 | |
| 90 | 210.5 | 349.5 | 310.5 | 165.5 | |
| 180 | 210.5 | 310.5 | 165.5 | ||
| 120 | 30 | 240.5 | 379.5 | 306.9 | 180.5 |
| 45 | 240.5 | 379.5 | 340.8 | 180.5 | |
| 90 | 240.5 | 379.5 | 340.5 | 180.5 | |
| 180 | 240.5 | 340.5 | 180.5 |
Curve wheel AL VFplus 30°
Curve wheel AL VFplus 45°
Curve wheel AL VFplus 90°
Curve wheel AL VFplus 180°
Note: High-pressure cleaning of the ball bearings is not permitted.
The curve wheel is used for the horizontal change in direction of the chain. It enables low-friction direction changes with very small radii.
Size: 65, 90, 120 Deflection angles Suitable chain types: all For circuit systems without chain return in bottom run (using a curve wheel or connection drive), the appropriate cover must be used for personal safety reasons|
Material |
|
| Curve wheel AL VFplus 65 30° |
Housing: diecast aluminum Chain wheel: PA; white Ball bearings: stainless steel/FDA |
| Curve wheel AL VFplus 65 45° | |
| Curve wheel AL VFplus 65 90° | |
| Curve wheel AL VFplus 65 180° | |
| Curve wheel AL VFplus 90 30° | |
| Curve wheel AL VFplus 90 45° | |
| Curve wheel AL VFplus 90 90° | |
| Curve wheel AL VFplus 90 180° | |
| Curve wheel AL VFplus 120 30° | |
| Curve wheel AL VFplus 120 45° | |
| Curve wheel AL VFplus 120 90° | |
| Curve wheel AL VFplus 120 180° |
Combination matrix
|
Straight |
Curves |
Drives |
Return Unit |
||||||||||||
|
Section profile AL open |
Section profile AL closed |
Assembly module |
Curve wheel |
Roller curve* |
Horizontal sliding curve |
Vertical curve |
Head drive |
Curve wheel drive |
Connection drive |
Center drive (STS)** |
Basic unit |
90° (STS)** |
Transmission kit |
||
|
Straight |
Section profile AL open |
J |
|||||||||||||
|
Section profile AL closed |
J |
J |
|||||||||||||
|
Assembly module |
J |
J |
N |
||||||||||||
|
Curves |
Curve wheel |
J |
J |
L2) |
L2) |
||||||||||
|
Roller curve* |
J |
N |
J |
N |
L1) |
||||||||||
|
Horizontal sliding curve |
J |
J |
J |
J |
N |
L1) |
|||||||||
|
Vertical curve |
J |
J |
J |
J |
L1) |
L1) |
L1) |
||||||||
|
Drives |
Head drive |
J |
J |
L2) |
L2) |
L1, 4) |
L1) |
L1, 4) |
N |
||||||
|
Curve wheel drive |
J |
J |
L2) |
L2) |
N |
L1) |
L1) |
N |
N |
||||||
|
Connection drive |
J |
J |
L2) |
L2) |
N |
L1) |
L1) |
N |
N |
N |
|||||
|
Center drive (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
N |
L1, 5) |
L1, 5) |
N |
N |
N |
N |
||||
|
Return Unit |
Basic unit |
J |
J |
L2) |
L2) |
L1, 4) |
L1) |
L1, 4) |
L2) |
N |
N |
L2, 3) |
L2, 3) |
||
|
90° (STS)** |
L5) |
L5) |
L2, 5) |
L2, 5) |
N |
L1, 5) |
L1, 5) |
N |
N |
L2, 5) |
N |
N |
L2) |
||
|
Transmission kit |
N |
N |
N |
N |
N |
N |
N |
J |
N |
J |
N |
J |
N |
N |
|
|
J |
possible without restrictions |
* Support profile must project 76+2 mm into the roller curve. |
|||||||||||||
|
L |
possible with restrictions |
** AL-STS adapter included in the scope of delivery. |
|||||||||||||
|
N |
not possible |
||||||||||||||
| 1) | Profile connector not required |
| 2) | Use of a profile piece (Lmin = 120 mm) |
| 3) | Assembly module required |
| 4) | For sizes 160-320: shorten the support rail on the dotted line |
| 5) | Use of the AL-STS adapter |
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.