Attributes

Productgroup ID	2
Packaging unit	Set
Material	Diecast aluminum
Weight	0.56kg
Scope of delivery	2 x holder, fastening material (FS)
Size [b]	90
Dimension [A]	15
Material information	Holder: Diecast aluminum,Fastening material: Steel, galvanized
Color	Silver
Fastening material	8x flange nut M8,8x T-bolt M8x25

• The chain conveyor 65-120 is placed on the ground and fastened by means of supports or even suspended from the ceiling. The suspension needs to be determined depending on the application.

Holder AL, VFplus 90
The chain conveyor 65 120 is placed on the ground and fastened by means of supports or even suspended from the ceiling. The suspension needs to be determined depending on the application.

• 3D CAD
• Data Sheet

Condition on delivery

Not assembled

Scope of delivery

Foot AL 60x60	incl. fastening material (FS1)
Strut profile 60x60, 20xL=5600mm
Strut profile 60x60
Mounting hole plug 60x60, black
Holder AL, VFplus 65	2 x holder, fastening material (FS)
Holder AL, VFplus 90
Holder AL, VFplus 120
Holder engine support AL, VFplus 65	Incl. fastening material
Holder engine support AL, VFplus 90
Holder engine support AL, VFplus 120
Floor dowel L95
Washer t=1mm
Washer t=3mm

Foot AL 60x60

Strut profile 60x60

Holder AL, VFplus 65

Holder AL, VFplus 90

Holder AL, VFplus 120

Holder engine support AL, VFplus 65, 90, 120

Floor dowel

No.	D	L	l1	l2max
	mm	mm	mm	mm
3842540668	8	95	65	30

Washer for round feet

Foot 60x60 (A), strut profile 60x60 (B), cap (C), holder for attaching the section profiles (D) 65, 90 or 120. A separate holder (E) is used to support the motors / drives Depending on the speed, accumulation behavior and weight, the supports are to be fixed at a distance of about 2 ... 3 m The supports for the stainless steel system may also be used for the aluminum system The holder (E) may only be used for AL systems Depending on the return chain, the height adjustment range is up to 79 mm (D) The holder (D) can also be used for ascending and descending conveyor sections (up to approx. 45°, depending on the return chain) by removing the centering lugs Holder (D) with drill guide for additional holes to fasten drip trays, trap guards for return chains, etc. Holder is easily centered in the slot thanks to centering lugs (D) Very simple assembly with plug-in screw connection (D)

	Material
Foot AL 60x60	Aluminum, silver coating (RAL 9006) Woven wire grille and fastening material: steel; galvanized
Strut profile 60x60, 20xL=5600mm	Aluminum, anodized
Strut profile 60x60
Mounting hole plug 60x60, black	PP
Holder AL, VFplus 65	Holder: diecast aluminum, silver Fastening material: steel; galvanized
Holder AL, VFplus 90
Holder AL, VFplus 120
Holder engine support AL, VFplus 65	Steel; galvanized
Holder engine support AL, VFplus 90
Holder engine support AL, VFplus 120
Floor dowel L95
Washer t=1mm	Spring steel, stainless
Washer t=3mm

Holder adjustment range

The aluminum holder adjustment range shown relates to the standard installation position (holder flush with the profile end) and the use of a flat chain for horizontal running of the chain. For vertical use, the adjustment range is reduced depending on the angle.