Attributes
Productgroup ID |
2 |
Packaging unit |
10 |
Transition between different roller spacing dimensions [p1/p2] |
130/325; 195/260 |
Material |
Steel, galvanized |
Weight |
0.134kg |
- Profile connector
- Intermediate plate
- Coupling
- Connection kits
- The coupling is used to connect the king shafts. A cross plate in the coupling compensates for alignment errors and concentricity tolerances.
- To connect two TS 5 modules, you will need:
— 4 profile connectors for section profiles (A)
— 2 profile connectors for lateral guides (B)
— 2 intermediate plates (C)
— 1 coupling (D) - Profile connectors for section profiles/lateral guides
- The profile ends are connected to each other using profile connectors.
- Intermediate plates for module transitions
- The modules (conveyor sections, drives, curves, diverters) are separated using intermediate plates with the respective roller dimension p.
- For connecting the king shaft. Compensates for alignment errors and concentricity tolerances.
- Notice: The coupling disk must be greased by the customer.
- Connection kits - Connection kits
- To connect two TS 5 modules, you will need:
— 4 profile connectors for section profiles (A)
— 2 profile connectors for lateral guides (B)
— 2 intermediate plates (C)
— 1 coupling (D) - To connect two TS 5 modules, you will need:
— 4 profile connectors for section profiles (A)
— 2 profile connectors for lateral guides (B)
— 2 intermediate plates (C)
— 1 coupling (D) - Profile connectors for section profiles/lateral guides - Profile connectors for section profiles/lateral guides
- Intermediate plates for module transitions - Intermediate plates for module transitions
- Notice: The coupling disk must be greased by the customer. - Notice: The coupling disk must be greased by the customer.
130/325 intermediate plate
Intermediate plate, Coupling, Connection kits, The coupling is used to connect the king shafts. A cross plate in the coupling compensates for alignment errors and concentricity tolerances., To connect two TS 5 modules, you will need:
— 4 prof
Scope of delivery
Profile connector 180, N10
|
incl. fastening material (FS)
|
|
Profile connectors for lateral guides
|
Profile connector
|
Screws
|
130/130 intermediate plate
|
|
|
130/195 intermediate plate
|
195/195 intermediate plate
|
130/325 intermediate plate
|
260/260 intermediate plate
|
260/325 intermediate plate
|
325/325 intermediate plate
|
King shaft coupling
|
Couplings, screws
|
Profile connector 180, N10
Connection kits
To connect two TS 5 modules, you will need:
4x profile connectors for section profiles (A) 2x profile connectors for lateral guides (B) 2x intermediate plates (C) 1x coupling (D)
The coupling is used to connect the king shafts. A cross plate in the coupling compensates for alignment errors and concentricity tolerances.
Profile connectors for conveyor section profiles/lateral guides
The profile ends are connected to each other using profile connectors.
Profile connector for section profile
Profile connectors for lateral guides
Intermediate plates
The modules (conveyor sections, drives, curves, diverters) are separated using intermediate plates with the respective roller dimension p.
Intermediate plates for module transitions
Coupling
For connecting the king shaft. Compensates for alignment errors and concentricity tolerances.
Coupling
Conveyor unit selection
No.
|
Material
|
3842528746
|
Steel; galvanized
Fastening material: steel; galvanized
|
3842545699
|
Steel; galvanized
|
3842545215
|
3842545354
|
3842545216
|
3842545355
|
3842545217
|
3842545648
|
3842545218
|
3842545160
|
Steel; galvanized
brass
|