Attributes

Productgroup ID	2
Packaging unit	10
Transition between different roller spacing dimensions [p1/p2]	130/130
Material	Steel, galvanized
Weight	0.044kg

• Profile connector
• Intermediate plate
• Coupling
• Connection kits
• The coupling is used to connect the king shafts. A cross plate in the coupling compensates for alignment errors and concentricity tolerances.
• To connect two TS 5 modules, you will need:
  — 4 profile connectors for section profiles (A)
  — 2 profile connectors for lateral guides (B)
  — 2 intermediate plates (C)
  — 1 coupling (D)
• Profile connectors for section profiles/lateral guides
• The profile ends are connected to each other using profile connectors.
• Intermediate plates for module transitions
• The modules (conveyor sections, drives, curves, diverters) are separated using intermediate plates with the respective roller dimension p.
• For connecting the king shaft. Compensates for alignment errors and concentricity tolerances.
• Notice: The coupling disk must be greased by the customer.
• Connection kits - Connection kits
• To connect two TS 5 modules, you will need:
  — 4 profile connectors for section profiles (A)
  — 2 profile connectors for lateral guides (B)
  — 2 intermediate plates (C)
  — 1 coupling (D) - To connect two TS 5 modules, you will need:
  — 4 profile connectors for section profiles (A)
  — 2 profile connectors for lateral guides (B)
  — 2 intermediate plates (C)
  — 1 coupling (D)
• Profile connectors for section profiles/lateral guides - Profile connectors for section profiles/lateral guides
• Intermediate plates for module transitions - Intermediate plates for module transitions
• Notice: The coupling disk must be greased by the customer. - Notice: The coupling disk must be greased by the customer.

130/130 intermediate plate
Intermediate plate, Coupling, Connection kits, The coupling is used to connect the king shafts. A cross plate in the coupling compensates for alignment errors and concentricity tolerances., To connect two TS 5 modules, you will need:
— 4 prof

• 3D CAD
• Data Sheet

Scope of delivery

Profile connector 180, N10	incl. fastening material (FS)
Profile connectors for lateral guides	Profile connector	Screws
130/130 intermediate plate
130/195 intermediate plate
195/195 intermediate plate
130/325 intermediate plate
260/260 intermediate plate
260/325 intermediate plate
325/325 intermediate plate
King shaft coupling	Couplings, screws

Profile connector 180, N10

Connection kits

To connect two TS 5 modules, you will need:

4x profile connectors for section profiles (A) 2x profile connectors for lateral guides (B) 2x intermediate plates (C) 1x coupling (D)

The coupling is used to connect the king shafts. A cross plate in the coupling compensates for alignment errors and concentricity tolerances.

Profile connectors for conveyor section profiles/lateral guides

The profile ends are connected to each other using profile connectors.

Profile connector for section profile

Profile connectors for lateral guides

Intermediate plates

The modules (conveyor sections, drives, curves, diverters) are separated using intermediate plates with the respective roller dimension p.

Intermediate plates for module transitions

Coupling

For connecting the king shaft. Compensates for alignment errors and concentricity tolerances.

Coupling

Conveyor unit selection

No.	Material
3842528746	Steel; galvanized Fastening material: steel; galvanized
3842545699	Steel; galvanized
3842545215
3842545354
3842545216
3842545355
3842545217
3842545648
3842545218
3842545160	Steel; galvanized brass