Attributes

Productgroup ID	2
Packaging unit	10
Material	PE
Weight	0.037kg
Required accessories	Screw 3842543246 (not in scope of delivery)
Size [b]	90

• Level WT surface with no indentations
• The entire top of the WT can be built upon since everything else on the section is ready-mounted below the top of the WT.
• Compatible with the ID 15 identification system. The integrated installation of a mobile data tag is also possible
• The product may also protrude beyond the WT if the position of the center of gravity is taken into consideration
• The mounted workpiece pallet must be provided with wear pads (steel or PE) by the customer.
• 1: WT plate
• 2: Centering bushing
• 3: End pieces
• 4: Steel workpiece pallet wear pad
• 5: PE workpiece pallet wear pad

PE wear pad VFplus 90
Level WT surface with no indentations, The entire top of the WT can be built upon since everything else on the section is ready mounted below the top of the WT., Compatible with the ID 15 identification system. The integrated installation of a mobile data

• 3D CAD
• Data Sheet

VarioFlow workpiece pallet (WT)

Optimum center of gravity range for smooth operation

Workpiece pallet VFplus 65, VFplus 90

For transporting products that are not suitable for accumulation operation or are unstable due to their geometry

Max. transport speed for operation with workpiece pallets: vN = 18 m/min Workpiece pallet wear pads either made of: Steel, for use in harsh environments PE, for use in clean environments Workpiece pallet load (workpiece, support, etc.) Size 65: 8 kg Size 90: 8 kg The modular concept allows for workpiece pallet lengths of up to 500 mm*. With centering bushings for positioning in the positioning unit.

      * For workpiece pallet with L > 300 mm, combine two 90° curve wheels with intermediate section (min. 200 mm).

      For workpiece pallet with L < 300 mm, use 180° curve wheel

Minimum length of the workpiece pallets: Size 65: Lmin = 76 mm Size 90: Lmin = 114 mm Minimum length of the workpiece pallets in order to incorporate the positioning unit: Size 65: Lmin = 125 mm Size 90: Lmin = 125 mm Minimum length WT for passive bridge: L ≥ 300 mm

 

Material:

WT plate: aluminum; natural, anodized End pieces: PA; black Workpiece pallet wear pads: steel; stainless, HV ≥ 480 or PE

Screw

PE wear pad

Steel wear pad