Attributes

Bendable	yes
Cover cap	yes
Productgroup ID	2
Packaging unit	100
Diameter D	17mm
Material	PE
Weight	0.00068kg
Color	Light gray (RAL 7035)

• Profile finishes:
  – blind hole DB11, DB17 or through-hole D11, D17
  – miter cut
• For end-to-slot connecting of two profiles at any angle, e.g. for framework constructions
• For the right-angled connecting of two profiles
• Very good accessibility for tools during assembly
• O-ring for fastening allows overhead assembly
• Quick connectors can be swiveled into the profile slot at the point of assembly
• Profile finishing: blind hole DI, DB11, DB17 or through-hole DI, D11, D17
• Note differing drilling intervals and load-bearing capacities when using with radial compensation
• Quick connector 9.8 with smaller connector sleeve
• The hole for the connector sleeve does not make contact with the slot flanks. This allows a visually attractive connection; the slot can be completely closed with the cover profile
• Tie rod head rotated at a 90° angle to the connector sleeve
• For end-to-end connecting of two profiles with equal cross-sections and at any angle, e.g. for frames
• Profile finishes:
  – blind hole DB11, DB17 or through-hole D11, D17
  – miter cut - Profile finishes:
  – blind hole DB11, DB17 or through-hole D11, D17
  – miter cut

Cap, quick connector D17
For the right angled connecting of two profiles, Very good accessibility for tools during assembly , Quick connectors can be swiveled into the profile slot at the point of assembly, Profile finishing: blind hole DI, DB11, DB17 or through hole DI, D11, D1

• 3D CAD
• Data Sheet

	Recommended accessories
	Anti-torsion element
	Radial compensation
	Drilling jig
	Cap

Radial compensation

Radial compensation

To avoid gaps and sharp edges on T-connections between two profiles using a central bolt or quick connector (note spacing of hole from the face of the profile) The slot segments can be broken out in order to fix surface elements in the slot Important note: the load carrying capacity of the profile connection is reduced when using radial compensation!

CAD data

Anti-torsion element

Anti-torsion element

Provides torsion resistance for profile connections with central bolts or quick connectors Subsequent installation in the connection possible

CAD data

Quick connector, 6 mm slot, 0°, 90° cover cap

Quick connector, 6 mm slot, 0°, 90° cover cap

For the right-angled connecting of two profiles Very good accessibility for tools during assembly  Quick connector for 6 mm slot with square head; can be used as a 0° or 90° connector Profile finishing: Blind hole DB8 or through-hole D8

CAD data

Quick connector, 8/10 mm slot, 0°

Quick connector, 10/10 mm slot, 0°, connector sleeve D = 9.8

Connection elements, selection criteria

Nut
8/8	500 N	40 Nm
8/10	2000 N	70 Nm
10/10	4000 N	140 Nm
10/10	800 N	50 Nm