Attributes

Productgroup ID	2
Thread size	M16
Packaging unit	1
Material	PA
Weight	1.095kg
Recommended accessories	Leveling foot 3 842 533 310
Size [b]	65,90,120,160,240,320
Material information	Foot: PA,Fastening material: Non-rusting steel 1.4301

• Components for constructing feet and frames using the stainless steel tube D48.3
• Tube fastened by clamping
• Spindle thread M16
• Supports can also be used in conjunction with AL sections
• Fast, simple leg set adjustment thanks to clever product details
• Drilling aids are available on the underside for doweling the leveling feet
• Easy-to-clean design with draining surfaces

Foot STS, two-leg
Components for constructing feet and frames using the stainless steel tube D48.3, Tube fastened by clamping, Spindle thread M16

• 3D CAD
• Data Sheet

Foot, three-leg

Foot, two-leg

Foot, two-leg

Foot, two-leg with flange

Cross connector for tube D48.3

Tube D 48.3

Tube D 48.3

Flange VFplus STS

Holder STS

Holder engine support STS

Leveling foot D80

The chain conveyor is placed on the ground by means of supports and fastened.

The support is constructed from single parts:

Foot in three different versions (A, B, C) tube (E), flange (F) for mounting the holders and holder (G) for attaching the section profiles. To support the motors /drives, it is imperative that a separate holder (H) is used.

Depending on the speed, accumulation behavior and weight, the supports are to be fixed at a distance of approx. 2-3 m The supports for the aluminum system can also be used on the stainless steel system. The holder (G) can be connected directly to a strut profile 60x60 and an S12x30-T50 (MGE catalog 3 842 530 236) Holder (H) can only be used for the STS system Holder (G) can also be used for ascending and descending conveyor sections (up to 28°, depending on the returning chain) Holder (G) with drilling aid to fasten drip trays, safety guards for returning chains, etc. Due to stability reasons, cross reinforcements are absolutely necessary when using feet B and C