Attributes

Productgroup ID	2
Modification	Additional versions are available on request from our modification department. ([email protected])
ESD	yes
Material	Steel, stainless
Weight	3.4kg
Scope of delivery	Incl. fastening parts (as shown)
Material information	Positioning unit: stainless steel,Fastening parts: Steel, galvanized,Cover caps: PA,Clamping claws: PU

• The plier-shaped form of the positioning unit (PE) makes it highly resistant to dirt and shavings and thus suitable for dirty environments.
• The WT is lifted approx. 1 mm above the transport level, thus eliminating the load on the conveyor chain during processing
• Positioning accuracy in the direction of transport: ± 0.15 mm (transverse: ± 0.1 mm, height: ± 0.1 mm)
• Maximum vertical press force (p = 4 bar): 400 N
• Maximum retention force (p = 4 bar) in the direction of transport: 300 N
• Suitable for retrofitting without disrupting the lateral guide
• The switch bracket can be installed in any position
• Minimum length of the workpiece pallets in order to incorporate the positioning unit:
  Size 65: L = 125 mm
  Size 90: L = 125 mm
• 2 positioning units can be combined for workpiece pallets with L > 250 mm. For this, the positioning mandrel is removed from one of the PEs and the workpiece pallets are fitted with eccentric centering bushings by the customer
• Position inquiry with assembly kit and 2 M12x1 sensors on the housing (sensor not in the scope of delivery) or with 3 842 535 150 on the cylinder
• Maximum permissible torque in the plier area: 60 Nm
• Minimum length of the workpiece pallets in order to incorporate the positioning unit:
  Size 65: L = 125 mm
  Size 90: L = 125 mm - Minimum length of the workpiece pallets in order to incorporate the positioning unit:
  Size 65: L = 125 mm
  Size 90: L = 125 mm

PE-VF/H
The switch bracket can be installed in any position, The plier shaped form of the positioning unit (PE) makes it highly resistant to dirt and shavings and thus suitable for dirty environments., The WT is lifted approx. 1 mm above the transport level, thus

• 3D CAD
• Data Sheet

Positioning unit VF90

1)	Center offset of the workpiece pallet when it is positioned
2)	Height offset of the workpiece pallet when it is positioned

Positioning unit VF65

1)	Center offset of the workpiece pallet when it is positioned
2)	Height offset of the workpiece pallet when it is positioned

Position monitoring kit

The plier-shaped form of the positioning unit (PE) makes it highly resistant to dirt and shavings and thus suitable for dirty environments. The WT is lifted approx. 1 mm above the conveying level, thus eliminating the load on the conveyor chain during processing.

Positioning accuracy in the conveying direction: ± 0.15 mm (across: ± 0.1 mm, height: ± 0.1 mm) Maximum vertical press force (p = 4 bar): 400 N Maximum holding force (p = 4 bar) in the conveying direction: 300 N Suitable for retrofitting without disrupting the lateral guide The switch bracket can be installed in any position Minimum length of the workpiece pallet in order to incorporate the positioning unit:

      Size 65: L = 125 mm

      Size 90: L = 125 mm

Two positioning units can be combined for workpiece pallets with L > 250 mm. For this, the position mandrel is removed from one of the PEs and the workpiece pallets are fitted with eccentric centering bushings by the customer. Position inquiry with assembly kit and 2 proximity switches M12x1 on the housing (proximity switches not included in the scope of delivery) or with 3 842 535 150 on the cylinder

 

1)	Not included in the scope of delivery