DAMPER DA 2/100-C
| Productgroup ID | 2 |
| Workpiece pallet total weight [mG] | 100kg |
| Mass [m] | 5kg |
| Operating temperature [T] max | 0 ... +60 °C |
| Pneumatic straight connection [Ø] | 6mm |
| Weight | 1.49kg |
| Notice | High-temperature damper on request |
| Nominal speed | 6,9,12,15,18 |
| Scope of delivery | Incl. fastening material,Damper DA 2/100-C for infieeding of the workpiece pallets WT 2 and WT 2/F |
| Workpiece pallet total weight [mG] mult | 100,100,100,95,55 |
| Delivery information | Not assembled |
| Material information | Housing: Aluminum, hard anodized,Stop: Steel, hardened |
- For permitted total weight of workpiece pallets up to 100 kg
- Pneumatic damper
- Infinitely adjustable
- During infeeding in a longitudinal section
- Optimal damping at a ratio of 2:1 between heavy and light workpiece pallets
- Can be combined with WT 2, WT 2/F, WT 2/H and WT 2/F-H
- Installation location: ST 2/... section, BS 2/... belt section
Pneumatic damper, Can be combined with WT 2, WT 2/F, WT 2/H and WT 2/F H, Infinitely adjustable, Optimal damping at a ratio of 2:1 between heavy and light workpiece pallets, For permitted total weight of workpiece pallets up to 100 kg, During infeeding in
DA 2/100-C Damper
* Dimensions in brackets apply to mounting on ST 2/...-H section profile
DA 2/… dampers are used to cushion the impact of workpiece pallets when they are moved from a transverse section into a longitudinal section or vice versa.
The damper damps the impact of the arriving workpiece pallet. The DA 2/100-C is suitable for infeeding from a transverse section into a longitudinal section. It is mounted directly on the section profile of the longitudinal section. The pneumatic return occurs in parallel to the opening of the stop gate, which permits the workpiece pallet to move toward the damper. The damper is not traversable.
| 1) | Not included in the scope of delivery |
|
No. |
3842525734 | ||
|
Max. total weight of workpiece pallet |
mG |
kg |
100 |
|
Max. operating temperature 1) |
T |
°C |
0 ... +60 |
|
Material entry |
Housing: Aluminum, hard anodized Stop: Steel, hardened |
||
|
Mass |
m |
kg |
5 |
|
Pneumatic push-in fitting |
Ø |
mm |
6 |
| 1) | High-temperature damper on request |
Permissible accumulation load
|
mG |
vN |
|
kg |
m/min |
|
100 100 100 95 55 |
6 9 12 15 18 |
Compressed air consumption of TS 2plus units
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.