Attributes

Productgroup ID	2
Workpiece pallet total weight [mG]	100kg
Monitoring range, min	430mm
Monitoring range, max	1230mm
Mass [m]	1.5kg
ESD	yes
Weight	2.161kg
Notice	Max. total WT weight applies when infeeding from a transverse section into a main section; for area monitoring, only the max. system weight of 240 kg cannot be exceeded,Min. WT weight applies per rocker body
Scope of delivery	Including fastening material for installation on ST 2/... conveyor section or BS 2/... belt section.
Recommended accessories	Additional MS rocker extension with second rocker and connecting strip for installation of a rocker positioned between the start and end of the conveyor section.
Required accessories	Sensor M12 circular with rated switching distance S<sub>N</sub> = 4 mm at vertical installation,Sensor M12 circular with rated switching distance S<sub>N</sub> = 8 mm at horizontal installation
Recommended accessories	Additional MS rocker extension with second rocker and connecting strip for installation of a rocker positioned between the start and end of the conveyor section.

• Fixed stop for workpiece pallet in the transverse conveyor
• For area monitoring
• For workpiece pallet recognition
• For permitted total weight of workpiece pallets > 30 kg
• Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/…-H section with a profile width of 50 mm
• n.a.
• Suitable for use in an EPA
• - n.a.

WI 2/X Rocker
Suitable for use in an EPA, , Suitable for mounting on an ST 2/… section with a profile width of 45 mm or an ST 2/… H section with a profile width of 50 mm, For area monitoring, For workpiece pallet recognition, Fixed stop for workpiece pallet in the tran

• 3D CAD
• Data Sheet

Recommended accessories

Additional MS rocker extension with second rocker and connecting strip for installation of a rocker positioned between the start and end of the conveyor section.

Scope of delivery

Including fastening material for installation on ST 2/... conveyor section or BS 2/... belt section.

WI 2/X Rocker

MS additional rocker extension

Rockers are used for the following areas:

For area monitoring As a stop for transverse conveying of workpiece pallets For workpiece pallet recognition

 

Depending on the desired function, WI/M, WI 2/… rockers should be fitted with one or two sensors.

No.			3842524447
Max. total weight of workpiece pallet 1)	mG	kg	100
ESD			yes
Mass 2)	m	kg	1.5
Monitoring range		mm	430,0 ... 1230,0

1)	Max. total WT weight applies when feeding from a transverse section into a main section; for area monitoring, only the max. system weight of 240 kg must not be exceeded
2)	Min. WT weight applies per rocker