POSITIONING UNIT PE 2/XP BG1
| Productgroup ID | 2 |
| Repetition accuracy | ±0,05 |
| Permissible vertical process force | 60N |
| Lift of WT over conveyor medium [h0] | 3 |
| Workpiece pallet total weight [mG] | 20kg |
| ESD | yes |
| Weight | 12.142kg |
| Delivery information | Fully assembled |
| Required accessories | Anvil plate for standard sizes from 160 x 160 mm to 320 x 240 mm,Anvil plate for 320 x 240 mm workpiece pallet ,Positioning pins, round and flat-sided h = 30 mm for standard anvil plate h = 21 mm for special designs,Stop gate VE 2/…,2x M12x70 and M12x67 sensor with rated sensing range S<sub>N</sub> = 4 mm, can be installed flush |
| Workpiece pallet width [bWT] | 160 |
| Length in direction of transport [lT] | 160 |
- Positions a workpiece pallet in a processing station with especially high vertical process force requirements (100 kN/60 kN), such as those needed for press-fit or riveting work
- Mounting in force cells, positive force introduction
- WT lift above transportation level, approx. 3 mm
- Can be combined with WT 2 workpiece pallets
Positions a workpiece pallet in a processing station with especially high vertical process force requirements (100 kN/60 kN), such as those needed for press fit or riveting work, Mounting in force cells, positive force introduction, WT lift above transpor
PE 2/XP Positioning Unit
| 1) | PE 2/XP Positioning Unit |
| 2) | Anvil Plate |
| 3) | Positioning pin, round |
| 4) | Positioning pin, flat-sided |
|
Size |
Workpiece pallet size |
Workpiece pallet size |
A |
B |
C |
D |
E |
F |
G |
|
|
lT |
b |
|
|
|
|
|
|
|
|
|
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
(mm) |
|
BG 1 |
160 |
160 |
322 |
142 |
222 |
270 |
80 |
40±0,2 |
78,5 |
|
BG 1 |
240 |
160 |
322 |
142 |
222 |
270 |
80 |
40±0,2 |
118,5 |
|
BG 2 |
160 |
240 |
405 |
146 |
298 |
350 |
160 |
100±0,3 |
78,5 |
|
BG 2 |
240 |
240 |
405 |
146 |
298 |
350 |
160 |
100±0,3 |
118,5 |
|
BG 2 |
320 |
240 |
405 |
146 |
298 |
350 |
160 |
100±0,3 |
158,5 |
Positioning unit PE 2/XP used for workpiece pallets larger than 320 x 240 mm
The positioning unit PE 2/XP for absorbing forces can also be used with workpiece pallets with large dimensions if the process forces are applied at certain points.
The PE 2/XP must then be configured in such a way that it can absorb the forces directly. The range of influence of the forces introduced may be eccentric. However, the area over which the process forces are applied must be within the surface of the upper part of the PE 2/XP.
| 1) | Not included in the scope of delivery |
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.