CROSS-CONNECTOR VG-311
| Productgroup ID | 2 |
| Material | PA |
| Weight | 0.383kg |
| Size [b] | 65,90,120,160,240,320 |
| Material information | Cross connector: PA,Fastening material, adjustment screw: Non-rusting steel 1.4301 |
| Color | Black |
- Easy-to-clean design with draining surfaces
- Few screwed connections
- Easy to clean thanks to ample draining surfaces
- Simple fastening of workpiece supports thanks to 10 mm profile slots in the workpiece pallet frame
- Supports can also be used in conjunction with AL sections
- Fast, simple leg set adjustment thanks to clever product details
- Drilling aids are available on the underside for doweling the leveling feet
Cross connector for tube D48.3
Few screwed connections, Easy to clean thanks to ample draining surfaces, Fast, simple leg set adjustment thanks to clever product details, Easy to clean design with draining surfaces, Supports can also be used in conjunction with AL sections, Simple fast
Few screwed connections, Easy to clean thanks to ample draining surfaces, Fast, simple leg set adjustment thanks to clever product details, Easy to clean design with draining surfaces, Supports can also be used in conjunction with AL sections, Simple fast
The chain conveyor is placed on the ground by means of supports and fastened.
The support is constructed from single parts:
Foot in three different versions (A, B, C) tube (E), flange (F) for mounting the holders and holder (G) for attaching the section profiles. To support the motors /drives, it is imperative that a separate holder (H) is used.
Depending on the speed, accumulation behavior and weight, the supports are to be fixed at a distance of approx. 2-3 m The supports for the aluminum system can also be used on the stainless steel system. The holder (G) can be connected directly to a strut profile 60x60 and an S12x30-T50 (MGE catalog 3 842 530 236) Holder (H) can only be used for the STS system Holder (G) can also be used for ascending and descending conveyor sections (up to 28°, depending on the returning chain) Holder (G) with drilling aid to fasten drip trays, safety guards for returning chains, etc. Due to stability reasons, cross reinforcements are absolutely necessary when using feet B and C
Request Quote
How to Find Us
If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.