Conveyor Profile, Hardware & Guides

With the 10 mm T-slot on the sides and bottom of the conveyor section profile it is possible, using connection links and cross connectors, to extend the conveyor to any length requirement you may have. Cross connectors are used to keep the conveyor rails parallel and should be used at 2000 mm intervals. Connection links are used to extend conveyor profile sections. Guide profile functions as a bearing surface for the belt or chain and also guides the workpiece pallet.

In addition, the T-slots provide a mount- ing location for pallet guides, wiper kits or other components and accessories.

QV2 Cross Connectors
QV2 Cross Connectors
Connection Links
Connection Links
CW2 Conveyor Wiper Kit
CW2 Conveyor Wiper Kit
SP2/B, SP2/B-50, SP2/B-100, SP2/R, SP2/C Conveyor Section Profiles
SP2/B, SP2/B-50, SP2/B-100, SP2/R, SP2/C Conveyor Section Profiles
FP2/B, FP2/B-100 Belt Guide Profile
FP2/B, FP2/B-100 Belt Guide Profile
FP2/R, FP2/C Roller & Flat-Top Chain Guide Profile
FP2/R, FP2/C Roller & Flat-Top Chain Guide Profile
SP2/C-H, SP2/R-H H.D. Conveyor Section Profiles
SP2/C-H, SP2/R-H H.D. Conveyor Section Profiles
FP2/H, GP2/H H.D. Flat-top and Roller Guide Profile
FP2/H, GP2/H H.D. Flat-top and Roller Guide Profile

Request Quote

How to Find Us

If you have any questions, just fill in the contact form, and we will answer you shortly. If you are living nearby, come visit us.

Headquarters

1505 W. Hamlin Road
Rochester Hills, MI 48309

Phone
248-584-5600
Fax
248-584-1117

West Michigan Office

Phone
269-381-1285
Fax
269-381-1379

Have questions?